|
Re: MALICE'S Build Thread!
I put together a list of what I needed:
Front Lip Brakes/Rotors Front Headlights GSR or SIR Seats Spark Plugs Air Filter Climate Control Unit Stereo Rims |
Re: MALICE'S Build Thread!
4 Attachment(s)
Picked up these rims
https://www.torontointegras.ca/attac...ine=1321845853 Took the Front End off, sourced out some JDM Black Housing Headlights, and ordered some OEM Bumper Clips https://www.torontointegras.ca/attac...ine=1321845853 https://www.torontointegras.ca/attac...ine=1321845853 https://www.torontointegras.ca/attac...ine=1321845853 |
Re: MALICE'S Build Thread!
1 Attachment(s)
The rims didnt last long, I found some EM2 SI rims, and decided I would go with these. Replaced front end, lined it up as best I could, new front Cross Drilled and Slotted Rotors, Low Dust Ceramic Pads, OEM Spark Plugs and Filter, SIR Front Seats, Climate Control Unit, Mugen REP Front Lip (Not installed). I also had some blue anodized lugs lying around and decided to use them.
https://www.torontointegras.ca/attac...ine=1321846038 |
Re: MALICE'S Build Thread!
That thing looks great! Good find on that civic, in your typical fasion I'd imagine you got that thing for a steal :)
How's she run? I'm a big fan of the wheel setup and lug combo. |
Re: MALICE'S Build Thread!
Originally Posted by Neon_Dave
(Post 343392)
That thing looks great! Good find on that civic, in your typical fasion I'd imagine you got that thing for a steal :)
How's she run? I'm a big fan of the wheel setup and lug combo. |
Re: MALICE'S Build Thread!
I always loved those EM2 rims. They look very clean for someone going for a stock look on a Honda.
The paint on the civic shines real nice too! |
Re: MALICE'S Build Thread!
That civic looks clean! :yeah: good work.
|
Re: MALICE'S Build Thread!
Originally Posted by AcuratePaul
(Post 343423)
That civic looks clean! :yeah: good work.
I am finally able to bring my Integra into the garage so will be taking off all body panels and storing them and going to begin on my engine bay this Sunday! |
Re: MALICE'S Build Thread!
Haha that was short-lived.
This weekend's supposed to be nice and warm again so should make for a great work day! |
Re: MALICE'S Build Thread!
Originally Posted by Neon_Dave
(Post 343430)
Haha that was short-lived.
This weekend's supposed to be nice and warm again so should make for a great work day! That civic looked soo nice. I liked those black rims a lot, they would look boss on my Integra. Cant figure out what I want spring time yet. Cant wait to see updates on your Integra though! |
Re: MALICE'S Build Thread!
Originally Posted by cyphon21
(Post 343432)
Shhh dont remind me haha... Im tired of working on it!
That civic looked soo nice. I liked those black rims a lot, they would look boss on my Integra. Cant figure out what I want spring time yet. Cant wait to see updates on your Integra though! |
Re: MALICE'S Build Thread!
Originally Posted by MALICE85
(Post 343433)
Thanks man, I am actually selling those rims. PM ME if you are interested.
|
Re: MALICE'S Build Thread!
holy...yo dude youve been busy!...
|
Re: MALICE'S Build Thread!
wow nice progress with the civic... too bad you sold it already haha i wouldve bought it
still in need of a car since i lost the teg : ( |
Re: MALICE'S Build Thread!
Originally Posted by aldrine
(Post 343454)
holy...yo dude youve been busy!...
|
Re: MALICE'S Build Thread!
1 Attachment(s)
So, now with my uncles '68 benz gone, i can finally bring my shell in the garage to start some bodywork and plan out my engine bay...
So just a refresher; this is MY SHELL. lol.. https://www.torontointegras.ca/attac...ine=1322439122 |
Re: MALICE'S Build Thread!
1 Attachment(s)
On friday we took off the front end, and I stored those panels. I also thought it would be a good idea to take off the doors, so in the garage it is easy to work around the car.
https://www.torontointegras.ca/attac...ine=1322439201 |
Re: MALICE'S Build Thread!
2 Attachment(s)
Finally rolled into the garage!!!
https://www.torontointegras.ca/attac...ine=1322439282 Today I didnt waste anytime, I cleaned out the bay, and my buddy took out the front dash. https://www.torontointegras.ca/attac...ine=1322439282 |
Re: MALICE'S Build Thread!
1 Attachment(s)
We took out heater core and blower, lost some weight in the dash, and also pulled most of the wiring harness out of engine bay..this Tuesday I will be degreasing the bay, and hopefully sanding it down Wednesday and Sunday..With working 6 days a week, Sundays is the only day really I have to work on the Teg...If anyone wants to help out, have some fun, and learn as we go they are most welcome to come by!
https://www.torontointegras.ca/attac...ine=1322439434 |
Re: MALICE'S Build Thread!
clean shell... no doubt about it
|
Re: MALICE'S Build Thread!
Yup, it's looking good. Interesting choice on the civic hb steering wheel!
|
Re: MALICE'S Build Thread!
Originally Posted by Neon_Dave
(Post 343493)
Yup, it's looking good. Interesting choice on the civic hb steering wheel!
|
Re: MALICE'S Build Thread!
Awesome progress..if I wasn't working 6 days a week I would come by sunday but i need a days rest from anything and everything physical lol
|
Re: MALICE'S Build Thread!
^^^yeah i know how it is..today when i get off work, i am going to degrease the bay and get it all cleaned up and ready for sunday.hopefully will be all sanded down by then..parts shopping on dec 9th!
|
Re: MALICE'S Build Thread!
5 Attachment(s)
So decided to take apart the motor, its getting rebuilt, degreased, block is going to be honed and new piston rings, ACL Rod Bearings, head will be rebuilt with a Supertech Valvetrain, and still deciding on what cam gears to go with!
https://www.torontointegras.ca/attac...ine=1323200572 After some hard work.. https://www.torontointegras.ca/attac...ine=1323200572 https://www.torontointegras.ca/attac...ine=1323200572 https://www.torontointegras.ca/attac...ine=1323200572 https://www.torontointegras.ca/attac...ine=1323200572 |
Re: MALICE'S Build Thread!
I will be swappign out the GSR Crank for an LS crank, trying to locate one, and some LS Rods..
|
Re: MALICE'S Build Thread!
2 Attachment(s)
After that, we decided to stop on the motor and degrease and scrape the bay so this weekend we can sand it down, and hopefully start filling the holes..
BEFORE https://www.torontointegras.ca/attac...ine=1323200692 AFTER https://www.torontointegras.ca/attac...ine=1323200692 |
Re: MALICE'S Build Thread!
Mad clean looks awesome...love seeing updates on this build, always interesting :yeah: like always keep up the awesome work:yeah:
|
Re: MALICE'S Build Thread!
Thanks man. Updates soon.
|
Re: MALICE'S Build Thread!
Ordered some new parts:
Russell SS Fuel Line Russell SS Clutch Line Energy Shifter Bushings Walbro 255 Fuel Pump Skunk2 Cam Seals Rywire Jumper Harness HONDA OEM Piston Rings They should be here first week of Jan, I am guessing some delays due to holiday season. Some work will be done on the Teg end of week - Stay Tuned! |
Re: MALICE'S Build Thread!
2 Attachment(s)
Started degreasing the transmission, my plan is to paint it black...
https://www.torontointegras.ca/attac...ine=1324998237 https://www.torontointegras.ca/attac...ine=1324998237 |
Re: MALICE'S Build Thread!
1 Attachment(s)
Started sanding down the bay, this took me almost 2 hours LOL..
https://www.torontointegras.ca/attac...ine=1324998275 |
Re: MALICE'S Build Thread!
2 Attachment(s)
Pistons
Before https://www.torontointegras.ca/attac...ine=1324998345 After https://www.torontointegras.ca/attac...ine=1324998345 Degrease, scrape, sand, degrease, light sand and dry! |
Re: MALICE'S Build Thread!
2 Attachment(s)
Before
https://www.torontointegras.ca/attac...ine=1324998409 After https://www.torontointegras.ca/attac...ine=1324998409 I also got in OEM Piston rings, no pics right now! |
Re: MALICE'S Build Thread!
5 Attachment(s)
SPECIAL DELIVERY!!
https://www.torontointegras.ca/attac...ine=1324998530 RUSSELL SS FUEL/CLUTCH LINES https://www.torontointegras.ca/attac...ine=1324998530 RYWIRE CONVERSION HARNESS https://www.torontointegras.ca/attac...ine=1324998530 ENERGY SHIFTER BUSHINGS https://www.torontointegras.ca/attac...ine=1324998530 WALBRO 255LPH https://www.torontointegras.ca/attac...ine=1324998530 |
Re: MALICE'S Build Thread!
6 Attachment(s)
And...another update...
T3/T4 Turbo https://www.torontointegras.ca/attac...ine=1324998700 Ram Horn Manifold https://www.torontointegras.ca/attac...ine=1324998700 https://www.torontointegras.ca/attac...ine=1324998700 Intercooler (I am going to get a new one I think) https://www.torontointegras.ca/attac...ine=1324998700 https://www.torontointegras.ca/attac...ine=1324998700 Boost Gauges and Turbo Timer https://www.torontointegras.ca/attac...ine=1324998700 |
Re: MALICE'S Build Thread!
Also I got a blackworks short shifter, no pics, but I am sure you guys know what it looks like, I will be continuing the transmission, and engine bay this week. Updates will be posted!
|
Re: MALICE'S Build Thread!
Very nice build so far. That is going to be nice once its all done.
|
Re: MALICE'S Build Thread!
i got balanced ls rods with arp studs and ctr pistons installed and balanced new rings and a ls crank balanced micropolished and knife edged lmk willing to sell for the right price
|
| All times are GMT -5. The time now is 05:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands