|
Well you can get a basic vtec convertion kit from www.full-race.com for 80 or 90, then you have to buy a headgasket, and you have everything you need. Very cheap build. Don't expect reliablility from that setup though, especially if your reving past 8k.
or you can buy the blackworks kit from teknotic for 200. Realisticly you need two dowel pins, and the vtec oil lines. both of those options will come with everything you need to bolt a vtec head to a b20/b18. If you want reliabiliy, you will build it with a spare block, get it checked, replace the bearing, rodbots, pistons/rings. and then got to town reving to +8k |
^^^ yeah the blackworks kit I can get for $170 U.S. on Internet. Where is Teknotic? Cash, no taxes?!?! I am sure I will be doing Pistons and Rods, but not going to be revving at 8K+ to be honest lol..Rodbolts, head studs, cams, gears, and Blackworks valvetrain may be in the plans...dont know yet..trying to work everything out..may just do the vtec conversion, couple bolt ons and go boost, as previously stated im looking to hit 220-250whp...so dont need to go overboard, but if the funds and the greed is there I may do it!!
|
**headstuds obv because of the conversion**
|
5 Attachment(s)
So i went to my first meet last night to pick up a head from a member, turned out to be a good experience and picked up a VERY clean Head...No Valve cover, but thats just an excuse to get a new one!!
Here is some pics of the parts that have shown up over the last couple of days!! My impulse buy at Migo Auto the other day... Attachment 8911 Attachment 8912 **sorry for the weak pics, my camera sucks, its GUNMETAL & WEIGHTED..** These mats came in the other day, I like them, but looking for input, they are matched with my door panels, and shift knob so I think they flow... Attachment 8913 And I already posted the net pic of this, but these ARE MINE!! Attachment 8914 and just cuz i can.. Attachment 8915 |
Now for the good stuff!!
|
5 Attachment(s)
Attachment 8906
Attachment 8907 Attachment 8908 WAIT..THERES MORE!!! Attachment 8909 Attachment 8910 Yes, those are ITR camshafts w/ Skunk 2 Pro Series Adjustable Cam Gears!!! |
So huge thanks to 92BlackDA for hooking me up, and even though it is super clean, next week I am taking it apart and sending it to be acid washed so it will look brand new, looking at full blackworks valvetrain, but not on the next shipment of parts..
**Next 2 weeks should produce a VTEC Kit, some ARP goodies, and possibly a rad & exhaust..please stay tuned** Once again your input, tips, and constructive criticism is always helpful!! |
Looking good dude. Glad to see some power adders ;D
If you need any info about turbo setup later, lemme know and I'll help with what I can. |
Originally Posted by Datenshi
(Post 338701)
Looking good dude. Glad to see some power adders ;D
If you need any info about turbo setup later, lemme know and I'll help with what I can. |
So I ordered my exedy slave and clutch master, but due to the post office and their strike, I dont know when I will be seeing my parts!!!
next week my Teg comes back home, sending the head to be machined and acid washed...pics to come! |
maybe i should keep my teg...lol
|
Originally Posted by aldrine
(Post 339002)
maybe i should keep my teg...lol
|
Integras are the ----!
|
soo I am getting a good deal on a Integra GSR, and due to me needed such items as:
VTEC DISTRIBUTOR OIL PUMP ECU I can buy this and save the purchase price on those and a couple other items that I may need, it has been rebuilt, and I am sure I can part the rest out to break even (at least) to save some money, what you guys think? |
Just keep the Teg with the better body so you can save money that way no?
Or the fact that it's rebuilt does it have an affect? |
no, my body is in way better condition, having the motor rebuilt is a good thing, new gaskets seals etc...im trying to figure out whether i should take the time and effort to break even on this gsr to get my parts for free, basically saving me close to $400 on my build...
|
awesome bro
|
thanks, more updates coming next week, been too busy to work on the teg!
|
Re: My B20 Build Thread!
got some parts in, will post up pics on sunday...
|
Re: My B20 Build Thread!
Was wondering what happened to the build looks like some pressed pause lol.
|
Re: My B20 Build Thread!
Post updates! Lol don't give up bro!
|
Re: My B20 Build Thread!
i moved into the new house, been busy and my garage is full of ----..theres actually no room to work on the teg, just some parts came in, will start stripping the bay and doing body as my parts slowly come in..parts arriving in August? Can anyone say Supertech?!?!?
|
Re: My B20 Build Thread!
The car is looking good so far, keep it up.
|
Re: My B20 Build Thread!
your welcome bro and the car is moving along nicely
|
Re: My B20 Build Thread!
thanks everyone for keeping up with the thread, lol, my garage is so packed right now, i cant even open my door. i got a 68 benz that belongs to my uncle that my dad is trying to get running again, so that white on red leather boat is taking up the garage, anyone want to store it for the winter so i can work on the teg??!? lol..
|
Re: My B20 Build Thread!
Got an update. **NEW SHELL**
The pics of my Teg right now, they body is rough. So while picking up this Integra for a part out (blown motor) when it arrived I saw how clean the body and interior is. One owner, no accidents, its a true 2000, and its Vogue Silver Mettalic, which I think will look clean with my PIAA rims. Pictures up tonight!!! |
Re: My B20 Build Thread!
pictures up NOW!!!
|
Re: My B20 Build Thread!
photobucket or my laptop is slow lol...shoud be up in a bit!
|
Re: My B20 Build Thread!
6 Attachment(s)
https://www.torontointegras.ca/attac...ine=1312835826
https://www.torontointegras.ca/attac...ine=1312835826 https://www.torontointegras.ca/attac...ine=1312835826 https://www.torontointegras.ca/attac...ine=1312835826 IMG]http://i1091.photobucket.com/albums/i394/Malice8505/REDPARTOUT046.jpg[/IMG] https://www.torontointegras.ca/attac...ine=1312835826 https://www.torontointegras.ca/attac...ine=1312835826 http://i1091.photobucket.com/albums/...PARTOUT051.jpg |
Re: My B20 Build Thread!
^^^^so i bought it to strip and part out, but with a body like that; it would be a shame...so i am going to swap my drivetrain/suspension/rims etc into this shell.
Pros: One owner Lady Driven No accidents A Legit 2000 Model MINIMAL rust what you guys think?? |
Re: My B20 Build Thread!
you did so much work on the red one though.... but take care of that rust!...
|
Re: My B20 Build Thread!
MINT! Forget the red one, the silver one is awesome.
you picked up a good SE Teg. as for the Rust on the qp...once fixing the only downside may be that the silver wont match to the rest of the car if you get it done at a body shop. Silver is super hard to match. But everything else is mint, + the extra chipped key security is noice in the 2000 if you do have it. I see an oem deck. Don't think this teg was ever molested, good buy! |
Re: My B20 Build Thread!
^^^ yeah the woman i bought it off was like 45 years old, and orig owner. so this teg is cleann...i got some other pics below that is from the other VSM teg we threw out yesterday...just so you know it was a complete running teg last tuesday.
|
Re: My B20 Build Thread!
3 Attachment(s)
|
Re: My B20 Build Thread!
1 Attachment(s)
|
Re: My B20 Build Thread!
Daaaaaaaaaaaamn.
Malice is the part out KAAAAAAAAAAANG. |
Re: My B20 Build Thread!
interior was gone too, the scrapper couldnt even give me any money for it, no suspension, no interior, front or rear end, so many bolt ons missing, no cat etc. lol..
|
Re: My B20 Build Thread!
Originally Posted by Vida
(Post 340419)
Daaaaaaaaaaaamn.
Malice is the part out KAAAAAAAAAAANG. |
Re: My B20 Build Thread!
3 Attachment(s)
thats gonna be the last complete part out for a while, its hectic. the pics below are the interior/trash bin, and my attempt at taking out the rear passenger side triangle window for a fellow member(Sorry Tim) - the pic you see is RIGHT after i took the panels out from inside, and slowly pryed the glass with a slim jim..
https://www.torontointegras.ca/attac...ine=1312842276 https://www.torontointegras.ca/attac...ine=1312842276 https://www.torontointegras.ca/attac...ine=1312842276 |
Re: My B20 Build Thread!
Geez...
Nice pick on the 2000 SE shell looks great fix up the rust and should be good too go :yeah: and I too agree on part out king..your getting rid of every Teg on the road slowly lol |
| All times are GMT -5. The time now is 08:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands