nizmo

iTrader: (7)

Hey everyone, i would like my front corner lights as my daytime running lamps. Anyone here a wiring expert? cause im not lol. I dont like the 2 inner lamps as the DRL's because, well....everyone has them like that. I was thinking about pulling the 2 fuses and turn my multi-fuction switch to the second selection before my headlights are activated.

Any help would be great,

Thanks,

Vida

iTrader: (2)

You can just take out the DRL fuses. Done. Open that little cover under the dash and look at the diagram. I think its a 15 amp fuse. take the fuse out and bam. you got the corner lights on when you put them on.

nizmo

iTrader: (7)

Yaaaaa, but i rather do it proper without pulling fuses. That would be my last resort.

Spike

iTrader: (5)

There's nothing with pulling the fuse for them. I did that with mine because I hate having DRL's, but that's just me. I was thinking of doing the same thing before, and then i just did not do it, lol.

I can run the wiring from the head lights down to the corner lights for you and make everything work for you Ryan.

nizmo

iTrader: (7)

ya mna i was thinking about doing the same thing but, the headlights require 85W i think and the corners are 35W i believe....so if thats the case I'm going to be melting sockets/blowing fuses.

Spike

iTrader: (5)

Yeah the bulbs are more powerful and the wiring is thicker for that reason. I believe with just adding a relay it should be fine. Because when I added driving lights on my old civic, I had them come on when I turned my parking lights on, and it took out my light switch. So after I replace the switch, I added a relay into the wiring system, and I never had a problem after that.

Like I'm not the best at wiring, but I can rewire things, and make them work. I redid Michelle's front lights a little different. So when the lights are on, it's just the corner lights that are on and not the turn/running lights, so the turning light is only a turning light now and not a running light aswell.