valve cover help
#1
valve cover help
i just need someone to explain to me on how to take my valve cover off.. wut i need to do.. remove spark plugs, wires etc... i m going to paint my valve cover cuz the black stuff is pealing off... or do u guys think i should just take it to da garage and let them do it? is it hard to do?? need help thanks
#2
leave the spark plugs in, just pull the wires out. remove all the nuts you can see on top of the valve cover and lift it up. it doesn't get much more simple. when you put it back on put a bit of honda bond silicone sealer in the corners where the gasket meets the sharp corners around the cam seals. i wouldn't just paint it though, you should get it powdercoated.
#4
Guest
Posts: n/a
Also, you might want to take your spark plugs out too and look at your chamber seals to see if they are leaking any oil in as well.
Thread
Thread Starter
Forum
Replies
Last Post
WildoutWhiteGSR
Integra DIY Articles
7
02-18-2007 04:23 PM