Spoon Calipers?
11-16-2007, 10:30 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Richmond Hill
Posts: 330
Spoon Calipers?
I currently have the 4x100 +42 offset 16inch rim/hub setup on the car and interested in getting the twin block spoon calipers,
i was told you can use the stock itr pads on these calipers, however, do i need to upgrade the rotor size? bolt setup?
For those who have the spoons,
PLEASE LET ME KNOW!
THANKS!
i was told you can use the stock itr pads on these calipers, however, do i need to upgrade the rotor size? bolt setup?
For those who have the spoons,
PLEASE LET ME KNOW!
THANKS!
Last edited by Mike935; 11-16-2007 at 10:41 PM.
11-17-2007, 03:36 PM
#4
There's plenty to do outside my room but I choose not to!
iTrader: (2)
Join Date: Aug 2003
Location: The Hammer!
Posts: 8,166
92-96 prelude vtec rotors re-drilled to 4x100. you'll need to put a back spacing on the rotor to have it centred between the pads. either that or machine the back of the caliper but nobody wants to do that
Thread
Thread Starter
Forum
Replies
Last Post