Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Sound Problem

Old Apr 30, 2008 | 04:46 PM
  #1  
JDM_overdose's Avatar
Thread Starter
There's plenty to do outside my room but I choose not to!
iTrader: (9)
 
Joined: Jul 2005
Posts: 5,141
From: 43°04′48″N-79°04′16″
Default Sound Problem

My cousin has a 99' Integra.

She has it over here, and her speakers in the back aern't working. Their not blown, because they checked out the wiring, and it's all back there.

They touched wires together, and they started to work, then stopped, and now aern't working at all.

What's going on?
Old Apr 30, 2008 | 04:51 PM
  #2  
DJINFERNO806's Avatar
Senior Member
 
Joined: Nov 2006
Posts: 2,084
From: Mississauga
Default

check the wires from the harness behind your deck... also if its anything like what mine was doing, the deck itself could have blown a resistor or mosfet and sound to that channel is now not possible or it comes on and off depending on how badly damaged the semiconducter is. Try putting in your deck in her DC and see if that helps, if it does then there is ure problem.
Old Apr 30, 2008 | 10:33 PM
  #3  
slvr_dc2's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 296
Default

^^Ditto, test the speakers by swapping the deck. I have that problem right now where there is very little power going to the rear passenger speaker. I just have to buy a new deck now...
Old May 1, 2008 | 08:28 AM
  #4  
JDM_overdose's Avatar
Thread Starter
There's plenty to do outside my room but I choose not to!
iTrader: (9)
 
Joined: Jul 2005
Posts: 5,141
From: 43°04′48″N-79°04′16″
Default

No deck to swap with lol

Any other way?
Old May 1, 2008 | 08:36 AM
  #5  
Smartass pHO's Avatar
Time to become a Premier Member!
 
Joined: Mar 2003
Posts: 3,994
From: www.tittypalace.com
Default

If you can't swap decks, swap speakers.

Do you know how to use a multimeter? I assume not, since you're a girl......
Old May 1, 2008 | 01:22 PM
  #6  
ls/vtec's Avatar
Member
 
Joined: Nov 2007
Posts: 548
From: Toronto
Default

I would assume there is butcher wiring on the harness.
Old May 1, 2008 | 01:58 PM
  #7  
DJINFERNO806's Avatar
Senior Member
 
Joined: Nov 2006
Posts: 2,084
From: Mississauga
Default

^ thats exactly the same problem i was facing too, last owner made mince-meat out of my harness....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aldrine
Integra Technical Questions and Tips
9
Aug 13, 2009 10:02 PM
tdot2gteg
Integra Technical Questions and Tips
2
Oct 31, 2005 08:44 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:58 AM.