6x9 in car??
12-25-2009, 01:37 AM
#1
6x9 in car??
ok so here is my problem, when i got my car it didnt come with any speakers at all, i took the aftermarket 6x9s out of my grand prix and hooked them up and they are just sitting on top at the back..they sound like ---- becuase they arnt in anything but my question is does anyone have 6x9s hooked up at all? is there a way anyone has installed them by cutting something or should i just build a box?? i dont really want to go out and have to buy speakers for the rear as these are saphires and are 600watts each and sound great, lmk what you guys have done or suggest, thanks.
12-25-2009, 07:41 AM
#4
i would but then i would have to but them and not really worth my time or money to buy good ones when i have them...just wrong size >.< i cant even cut into where the stock ones sit becuase these are still too big. anyone who if it would sound like crap if i made a large box for them and put them in the trunk? :S
12-25-2009, 01:36 PM
#6
There's plenty to do outside my room but I choose not to!
iTrader: (5)
Join Date: Apr 2009
Location: Burlington
Posts: 5,142
They will fit in the back spots on the DC's you just have to remove the oem bracket aswell, and then figure a way to keep them from moving, the fronts they will not fit, and it's not worth it to try to make them fit. There's just some things you just spend the money and get the right parts, and the fronts are it.
12-28-2009, 11:03 AM
#8
Ya i have also have 6x9 in the back...i had to cut the oem bracket to fit it in...also i cut 2 brackets on each side to hold them stredy...i had to remove the whole panel to work on them thou which was a bitch.but they sound great. but this is in my DC.
12-28-2009, 02:11 PM
#10
There's plenty to do outside my room but I choose not to!
iTrader: (9)
Join Date: Jul 2005
Location: 43°04′48″N-79°04′16″
Posts: 5,142
I can take a pic but it wont be clear because I really dont want to take my seats out and take the side pannel out.ill take a snap of the cover off. Its really cold. Ill c what I can do.
What i did was take out the black foam that supports the speakers. Only 1 screw is holding the speaker in place. Only 1 screw can go in, because its 6x9, the dimention of the bolt pattern isnt aligned with the speaker. You can make a bracket by welding it to the inner frame and make a hole in the bracket for a bolt to hold the speaker. But mine are just resting on the frame and they havnt moved yet.
What i did was take out the black foam that supports the speakers. Only 1 screw is holding the speaker in place. Only 1 screw can go in, because its 6x9, the dimention of the bolt pattern isnt aligned with the speaker. You can make a bracket by welding it to the inner frame and make a hole in the bracket for a bolt to hold the speaker. But mine are just resting on the frame and they havnt moved yet.
12-29-2009, 04:52 AM
#12
any pics will be great guys!! i just wana get a bit of a visual idea before i do anything, iv been looking around the net too, seen other people with it done but cant seem to find any pics, seems like a myth lol.
my 6x9s magnets JUST BARELY fit in the holes for the stock speakers so im gona have to do alot of chopping
my 6x9s magnets JUST BARELY fit in the holes for the stock speakers so im gona have to do alot of chopping
12-29-2009, 11:27 AM
#13
Also, when and or IF i do get them in there, is there something i should do inside the towers?? iv seen other posts about this topic that iv found and people are saying something about separating the front and the back of the speaker for more bass?? what is that about could someone explain this to me?? im not very good with audio lol.
12-29-2009, 12:17 PM
#14
i would love to take pics for ya but dont got my car and like overdose said you have to take out the back seats and the side panels to really see what you gotta do.
Its really not to difficult just add some reinforcements to the speaker 2 brackets should do. and the thing about separting the speaker i have never heard of that before.
Its really not to difficult just add some reinforcements to the speaker 2 brackets should do. and the thing about separting the speaker i have never heard of that before.
12-29-2009, 12:52 PM
#15
There's plenty to do outside my room but I choose not to!
iTrader: (9)
Join Date: Jul 2005
Location: 43°04′48″N-79°04′16″
Posts: 5,142
Seperating the speaker is really stupid. Might as well buy a 10inch subwoofer.
You dont even need to make brackets. Just one screw will hold it and rest the speaker on the inner body.
You dont even need to make brackets. Just one screw will hold it and rest the speaker on the inner body.
12-29-2009, 01:11 PM
#16
ohh ok lol i was a little confused at to what they were talking about aswell :S
but today isnt snowing or anything and its pretty decent out so i think im gona rip ---- apart today
ill go take pics right now, itll be a mission to fit these speakers in -_-
but today isnt snowing or anything and its pretty decent out so i think im gona rip ---- apart today
ill go take pics right now, itll be a mission to fit these speakers in -_-
12-29-2009, 02:31 PM
#19
There's plenty to do outside my room but I choose not to!
iTrader: (9)
Join Date: Jul 2005
Location: 43°04′48″N-79°04′16″
Posts: 5,142
OHHHHHHHHH. your putting it in a DA.
Simple, just put it on an angle. it will rest on the headrest of the seat. Dont even have to put a screw in.
Whats aith all the foam stuff.
Simple, just put it on an angle. it will rest on the headrest of the seat. Dont even have to put a screw in.
Whats aith all the foam stuff.
Last edited by Spike; 12-30-2009 at 12:29 AM.
12-29-2009, 06:49 PM
#21
There's plenty to do outside my room but I choose not to!
iTrader: (9)
Join Date: Jul 2005
Location: 43°04′48″N-79°04′16″
Posts: 5,142
Im kinda bored. Im gonna go ripout all my rear interior and clean it. Maybe ill weld some custom strut bars.
If anyone needs rear mint DA seats, side interior pannels. seatbelts ect...msg me
If anyone needs rear mint DA seats, side interior pannels. seatbelts ect...msg me
12-29-2009, 10:42 PM
#22
lol you serious anthony...i have done that once just torn out the whole interior in the back and cleaned it up...so much crap there. You dont need to weld struts can pick up good ones for 30. the one i have came off a DA.
12-30-2009, 01:33 AM
#25
There's plenty to do outside my room but I choose not to!
iTrader: (9)
Join Date: Jul 2005
Location: 43°04′48″N-79°04′16″
Posts: 5,142
I love the interior of the DA. the DC interior is to round-y. the DA has a nice sleek look. and dont hate on me, i own a DC too lol:P.
Hey paul, tomorrow i get my paystub. Lets see how much I get paid. Lets all have our fingers crossed that its more then 350$. LMAO imagine its 350.01 haha.
Pray for me people. seriously. I want this engine home within 7 days.
Hey paul, tomorrow i get my paystub. Lets see how much I get paid. Lets all have our fingers crossed that its more then 350$. LMAO imagine its 350.01 haha.
Pray for me people. seriously. I want this engine home within 7 days.
12-31-2009, 11:58 AM
#31
i had them just sitting on the top on a slant b4 but it looked like ----, i cut them and now they sit flat in there, doesnt have any bass really tho i gotta seal around the speakers still but it looks better.
Thread
Thread Starter
Forum
Replies
Last Post
karsa
Integra Parts For Sale
1
03-27-2011 01:38 PM
lebaunit
Integra Parts For Sale
1
02-09-2011 07:59 PM