Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Won't crank

Old Apr 26, 2010 | 05:58 PM
  #1  
trilib2000's Avatar
Thread Starter
n00b
 
Joined: Jun 2008
Posts: 64
From: Newmarket
Default Won't crank

Hey guy's first off, Great site. I have a 93 teg (RS) with a B16 swap, I've attached all the stuff i need for boost but the car won't turn over. I think it maybe due to a bad ground but just posting it out there for anyone that may have experinced the same bu** sh**

I have until the 8th of May to go and see Zeeman and i want to have a weeks work of testing before i get to him.. Thanks guys anyhelp will be taken.
Old Apr 27, 2010 | 01:56 AM
  #2  
Burfy's Avatar
Junior Member
iTrader: (2)
 
Joined: Oct 2008
Posts: 265
From: Hamilton, ON
Default

try jumping your "S" terminal to 12v.. Make sure the car is not in gear and you chock the wheels.. If the starter engages then you have an issue with your ignition switch or the wire from the ignition switch to the starter. If it doesn't do anything except spark then you need to replace the starter. If there's no spark at all check to see if you have 12V at your battery. Does everything else in the car work well?
Old Apr 27, 2010 | 07:13 AM
  #3  
Spike's Avatar
There's plenty to do outside my room but I choose not to!
iTrader: (5)
 
Joined: Apr 2009
Posts: 5,142
From: Burlington
Default

You very well could just not have a ground that is not making full contact.
Old Apr 27, 2010 | 11:01 AM
  #4  
AcuratePaul's Avatar
Who Are You?

iTrader: (8)
 
Joined: Mar 2009
Posts: 4,803
From: Wherever Your Not
Default

Ya check all your grounds cuz I ran into the same problem when I did my swap it wouldn't make a sound when turning the key. Turned out to be a ground so just double check all the grounds again. Just look over all the options.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:19 AM.