willl this tire fit on my car??
#1
willl this tire fit on my car??
my factory size is 195/55/15, but im looking into getting some 16" rims that were used, but the tire size is 195/50/16, it should be ok correct??? no rubbing on the inner walls or anything?
#4
I guess I'll post more information for you, might as well give you some knowledge.
If you don't already know what the numbers are..
First number: 195 = Width of the tyre in millimeters
Second number: 55 or 50 = How high the sidewall of the tyre is, it's a percentage of the WIDTH. So 55% of 195 or 50% of 195, ok?
Third number: Wheel (rim) size, 15 = 15 inches.. 16 = 16 inches.. and so on.
As long as your tyre meets the rim width and height.. ie.. 195/*/16 tyre.. on a 195/*/16 wheel (rim) you're good to go as long as the bolt pattern and spacing are the same.
If you don't already know what the numbers are..
First number: 195 = Width of the tyre in millimeters
Second number: 55 or 50 = How high the sidewall of the tyre is, it's a percentage of the WIDTH. So 55% of 195 or 50% of 195, ok?
Third number: Wheel (rim) size, 15 = 15 inches.. 16 = 16 inches.. and so on.
As long as your tyre meets the rim width and height.. ie.. 195/*/16 tyre.. on a 195/*/16 wheel (rim) you're good to go as long as the bolt pattern and spacing are the same.
#12
And from what you've told us about the rims, they should fit fine. Just as vida said.. make sure the bolt pattern is 4x100.. not 4x114.3 .. or whatever it is
#16
sweettt!! thanks pretty excited now first set of rims, and my first intake in my car i put on today, with the AEM filter sounds nice and the car feels alot better then when i had my stock one on
#18
yea ur right about that, i did notice that my stock gsr suspension is not that bad, it has a very decent ride , and the height is not bad, alot of ppl complain about it being to low and what not but i think its nice, it just clears the curb when i open the door , im thinking about lowering it since shocks are not to pricey, but i heard its bad for ur stock shocks if u just change to lowering springs
#19
if you are on a stock suspension set up you can fit 17" 205/55/17 that't what i had on my N/A setup and they fit no problem and never rubbed but once you get lowered you are gonna make sure what tires and rims you get so you don't rub I think 16" are okay to a certain drop and then they might rub.
#23
#24
Diameter Difference: 0.98%
you're gold.
use this:
http://www.1010tires.com/TireSizeCal...?action=submit
you're gold.
use this:
http://www.1010tires.com/TireSizeCal...?action=submit
Thread
Thread Starter
Forum
Replies
Last Post
S_A_W
Standard Auto Wreckers
0
05-29-2014 08:58 AM
Vtec_Concept
Integra Parts For Sale
0
11-12-2008 11:19 PM
Jeeves
Integra Technical Questions and Tips
3
04-16-2006 12:12 PM