Where to get driveshafts?
07-17-2007, 04:43 PM
#1
n00b
Thread Starter
Join Date: Mar 2006
Location: Toronto
Posts: 64
Where to get driveshafts?
Hey guys, I'm almost done my Integra but all I need are driveshafts to pass safety.. Please point me to a place in Scarborough/East Toronto/Markham area that sells driveshafts for a good price.. thanks!!
07-20-2007, 06:56 AM
#8
n00b
Join Date: Sep 2006
Location: over there
Posts: 44
NAPA CV shafts are good, but don't buy rebuilt shafts, spend the extra and get the new shafts. I had the rebuilts and went through 2 sets in 5-6 months ... put up the difference and got the "new" ones and had no probs since.
"new" shafts have new bearing cage, new bearings and new cup. Shafts are reused as long as the splines are good
i paid approx $270 ea, but that's at least 6 years ago
I suggest a place called Constant Velocity. I think they got a location at markham and finch.
remember, look for "new" assemblies not rebuilts. If your ride is lower than 1.0", the angle and stress put on the end joints itself will cause them to deterioate faster.
"new" shafts have new bearing cage, new bearings and new cup. Shafts are reused as long as the splines are good
i paid approx $270 ea, but that's at least 6 years ago
I suggest a place called Constant Velocity. I think they got a location at markham and finch.
remember, look for "new" assemblies not rebuilts. If your ride is lower than 1.0", the angle and stress put on the end joints itself will cause them to deterioate faster.
Thread
Thread Starter
Forum
Replies
Last Post