USDM OEM Foglight Switch Wiring
#1
Guest
Posts: n/a
USDM OEM Foglight Switch Wiring
So I wired up my JDM fogs to a simple switch from Canadian Tire. It has just a Negative and Positive lead.
Can I wire it up to a USDM Integra Foglight switch? I know there are a lot more wires coming out of the switch.
Anyone have any experience with this?
ThanX.
Can I wire it up to a USDM Integra Foglight switch? I know there are a lot more wires coming out of the switch.
Anyone have any experience with this?
ThanX.
#3
Guest
Posts: n/a
Originally Posted by nautica_t YO
Tony yes you can, there are 3 wires on the usdm switch. and i'm looking at my switch right now
one is a ground, one is for power switched, and the other is for the indicator.
one is a ground, one is for power switched, and the other is for the indicator.
Does the indicator line have to be hooked up? Or will the switch function just with the Positive/Negative hooked up?
Thanks.
#4
it should work without the indicator..
but the more i look at it and think about it.
it works like this..
ground.... positive from a constant source... and lastly postive towards the fogs..
as the fogs has a grounding point on them at there end as well.
but the more i look at it and think about it.
it works like this..
ground.... positive from a constant source... and lastly postive towards the fogs..
as the fogs has a grounding point on them at there end as well.
#5
Yes it would work with an oem switch. Basically the oem switch is broken into three seperate things.
Power
Ground
Illumination
Power is from a 12v source
Ground is just that, Ground
Illumination is just another 12v I believe, it's to make the led turn on in the switch.
Power
Ground
Illumination
Power is from a 12v source
Ground is just that, Ground
Illumination is just another 12v I believe, it's to make the led turn on in the switch.
Thread
Thread Starter
Forum
Replies
Last Post
jasonjai
Integra Parts For Sale
5
08-17-2008 03:15 PM