USDM OEM Foglight Switch Wiring
So I wired up my JDM fogs to a simple switch from Canadian Tire. It has just a Negative and Positive lead.
Can I wire it up to a USDM Integra Foglight switch? I know there are a lot more wires coming out of the switch. Anyone have any experience with this? ThanX. |
Tony yes you can, there are 3 wires on the usdm switch. and i'm looking at my switch right now :p
one is a ground, one is for power switched, and the other is for the indicator. |
Originally Posted by nautica_t YO
Tony yes you can, there are 3 wires on the usdm switch. and i'm looking at my switch right now :p
one is a ground, one is for power switched, and the other is for the indicator. Does the indicator line have to be hooked up? Or will the switch function just with the Positive/Negative hooked up? Thanks. |
it should work without the indicator..
but the more i look at it and think about it. it works like this.. ground.... positive from a constant source... and lastly postive towards the fogs.. as the fogs has a grounding point on them at there end as well. |
Yes it would work with an oem switch. Basically the oem switch is broken into three seperate things.
Power Ground Illumination Power is from a 12v source Ground is just that, Ground Illumination is just another 12v I believe, it's to make the led turn on in the switch. |
excellent. Thanks for the replies guys.
Now I just gotta get me a switch. |
All times are GMT -5. The time now is 08:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands