Integra Technical Questions and Tips Tech discussion for all things Acura Integra

torn cv boot?

Thread Tools
 
Search this Thread
 
Old Nov 16, 2009 | 12:46 AM
  #1  
integra1's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Aug 2009
Posts: 232
From: ssauga
Default torn cv boot?

while driving over 80km/h im noticing a slight clicking noise coming from the front driver side, i was told that my cv boot might be torn... i was wondering if its just the boot or it can be the whole cv joint? the car doesnt make any noise at low speeds or even reverse, only sometimes when im getting on the ramp for the highway or driving over 80km/h im hearing this. how much would it be to fix just the driver side boot? also, i need to find a good affordable mechanic in mississauga, if anyone has links let me knoww
Old Nov 17, 2009 | 03:48 PM
  #2  
XNXIXTXRXOX's Avatar
Member
 
Joined: Jun 2009
Posts: 862
From: Sauga City
Default

you generally replace the whole thing. going through all the hassle and time of just the boot, you do the whole thing. i've never done/seen some replace a boot at all.
Old Nov 17, 2009 | 05:12 PM
  #3  
Spike's Avatar
There's plenty to do outside my room but I choose not to!
iTrader: (5)
 
Joined: Apr 2009
Posts: 5,142
From: Burlington
Default

Most shop will replace the whole c/v shaft, but it only take about 20 mins to replace and it's a ---- load cheaper on parts, but you pay more for labor, vs only spending really half the time changing the whole shaft which is less labor, but more for the part, plus if you change the whole c/v shaft, you know it's new, and its less likely to ---- on you again.
Old Nov 17, 2009 | 05:55 PM
  #4  
JDM_overdose's Avatar
There's plenty to do outside my room but I choose not to!
iTrader: (9)
 
Joined: Jul 2005
Posts: 5,141
From: 43°04′48″N-79°04′16″
Default

If your willing to come to niagara, I can get it installed for 100$. This guy is a mechanic for hydro1. and he works outta his garage. he has a source for parts at dirtttttttttt cheap.
Old Nov 17, 2009 | 06:21 PM
  #5  
rdtx2005's Avatar
n00b
 
Joined: Aug 2008
Posts: 79
From: Toronto
Default

heck.. i'll do it for him for 100
Old Nov 19, 2009 | 11:39 AM
  #6  
8500 RPM's Avatar
Junior Member
iTrader: (3)
 
Joined: Jun 2004
Posts: 273
From: Toronto
Default

If you hear clicking, you're too late. The CV joint has to be replaced. You can try regreasing it and changing the boot but it's better off that you do the whole joint. I think it should run you no more than $300 all-in for each side, hopefully less.
Old Nov 19, 2009 | 01:43 PM
  #7  
integra1's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Aug 2009
Posts: 232
From: ssauga
Default

thanks i got quoted 60 bucks for a new shaft, and another 60 bucks for labour
so 120 isnt that bad, plus the shop is only 15 mins away from my house, i'll get it done tomorrow

i havent been driving the car for a week, i miss driving standard, automatic is soo boring
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
team_AMAZING
Integra Technical Questions and Tips
5
Aug 4, 2005 12:35 AM




All times are GMT -5. The time now is 08:47 AM.