Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Thinking of buying new clutch kit- any advice?

Old Nov 23, 2008 | 10:06 PM
  #1  
esco786's Avatar
Thread Starter
n00b
 
Joined: Apr 2008
Posts: 23
From: scarborough
Default Thinking of buying new clutch kit- any advice?

Hey, I think I need a new clutch kit. I have a stock 97 LS with no plans to mod it.

http://cgi.ebay.ca/94-01-INTEGRA-CIV...1%7C240%3A1318

http://cgi.ebay.ca/EXEDY-CLUTCH-KIT-...1%7C240%3A1318

Don't want to spend too much on it because it's my winter beater. What do you guys think about the above clutch?My mechanic recommended OEM but I've seen many OEM on ebay :\

Any other `decent` clutch kits you guys can recommend? Also, is it required to change the flywheel?

Thanks for your replies guys.
Old Nov 23, 2008 | 11:50 PM
  #2  
black_ac_gsr's Avatar
Member
iTrader: (3)
 
Joined: Jan 2007
Posts: 793
From: hamilton
Default

These clutch kits are fine if you want the car stock and have no plans to modify it. Make sure the clutch is alignged properly on the install and the flywheel may need maching if there are any scores or heat fade on the surface wich meshes with your friction disc. You dont change the flywhell unless it has been machined more then once and is uderspec or has a runout issue (warpage).These are oem replacement kits and if you mean from honda? Good luck i hope you have an arm and a leg to pay them with.

Last edited by black_ac_gsr; Nov 23, 2008 at 11:53 PM.
Old Nov 24, 2008 | 09:50 AM
  #3  
esco786's Avatar
Thread Starter
n00b
 
Joined: Apr 2008
Posts: 23
From: scarborough
Default

Originally Posted by black_ac_gsr
These clutch kits are fine if you want the car stock and have no plans to modify it. Make sure the clutch is alignged properly on the install and the flywheel may need maching if there are any scores or heat fade on the surface wich meshes with your friction disc. You dont change the flywhell unless it has been machined more then once and is uderspec or has a runout issue (warpage).These are oem replacement kits and if you mean from honda? Good luck i hope you have an arm and a leg to pay them with.

Thanks for the quick reply. One's told me exedy's are a lil stiff so I may consider the other one. Ya, i know it's a hefty expense- lowest quote I got for clutch replacement is $275 on labour. So $400 total for this ---- :\

Just getting the car winter-ready.
Old Nov 24, 2008 | 10:08 AM
  #4  
BestodaBest's Avatar
Junior Member
 
Joined: Jan 2008
Posts: 425
From: Brampton
Default

Exedy's Stage 1 organic material clutch is equivalent to OEM.

Exedy also manufactures the OEM friction discs for Honda (not sure which models).

I would highly recommend the Exedy Stage 1 kit; high quality, and durable... so long as you keep your setup stock.

Lastly, i'd HIGHLY recommend either resurfacing your flywheel, or replacing it. If you do not, you *can* suffer from annoyances like clutch chatter, scoring, or rapid wear on your friction disc.
Old Nov 24, 2008 | 10:26 AM
  #5  
Reza's Avatar
Senior Member
 
Joined: Feb 2005
Posts: 1,769
From: North York
Default

get a xtd stage 1 clutch kit. i've had one on my integra with 30000+ driving and now have a stage 3 one on my civic and i beat the hell out of it with over 15k driving and no problem whatsoever.

http://cgi.ebay.ca/94-01-INTEGRA-XTD...1%7C240%3A1318
Old Nov 24, 2008 | 10:38 AM
  #6  
esco786's Avatar
Thread Starter
n00b
 
Joined: Apr 2008
Posts: 23
From: scarborough
Default

Originally Posted by BestodaBest
Exedy's Stage 1 organic material clutch is equivalent to OEM.

Exedy also manufactures the OEM friction discs for Honda (not sure which models).

I would highly recommend the Exedy Stage 1 kit; high quality, and durable... so long as you keep your setup stock.

Lastly, i'd HIGHLY recommend either resurfacing your flywheel, or replacing it. If you do not, you *can* suffer from annoyances like clutch chatter, scoring, or rapid wear on your friction disc.

Based on what ac_gsr said, i hope the flywheel hasn't been previously worked on and may stick with the original and have it resurfaced. Reza- how's the pedal on that - i dont like the clutches very stiff.
Old Nov 24, 2008 | 11:00 AM
  #7  
Reza's Avatar
Senior Member
 
Joined: Feb 2005
Posts: 1,769
From: North York
Default

Originally Posted by esco786
Based on what ac_gsr said, i hope the flywheel hasn't been previously worked on and may stick with the original and have it resurfaced. Reza- how's the pedal on that - i dont like the clutches very stiff.
it's pretty good. on a scale of 1-10 10 being the stiffest i'd say it's a 6.5
Old Nov 27, 2008 | 06:44 AM
  #8  
plzbeleiveit's Avatar
n00b
 
Joined: Sep 2006
Posts: 65
From: toronto
Default

competetion stage 2, 3, 4, 5

all very cheap and VERY good clutch.
Old Dec 4, 2008 | 03:57 PM
  #9  
Blacktie's Avatar
Member
 
Joined: Mar 2007
Posts: 559
From: toronto zoo
Default

Originally Posted by BestodaBest
Exedy's Stage 1 organic material clutch is equivalent to OEM.

Exedy also manufactures the OEM friction discs for Honda (not sure which models).

I would highly recommend the Exedy Stage 1 kit; high quality, and durable... so long as you keep your setup stock.

Lastly, i'd HIGHLY recommend either resurfacing your flywheel, or replacing it. If you do not, you *can* suffer from annoyances like clutch chatter, scoring, or rapid wear on your friction disc.
exedy is FTW that clutch grabs HARD lol for a stg 1
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tsquared
Pictures and Videos
6
Jan 10, 2008 08:22 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:30 AM.