Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Strange bog

Old Nov 6, 2009 | 06:42 PM
  #1  
JDMTURBOZ's Avatar
Thread Starter
n00b
 
Joined: Nov 2009
Posts: 6
From: TIMMINS
Default Strange bog

HEY
im new to this Integra thing. just got an 01 Supercharged GSR. pulled hard all week. now out of nowhere it has started bogging.pulled the plug wires and plugs.one wire was full of water! cleaned and dried them out but the bog is still there. car drives fine at a steady rpm but as soon as i accelerate the bog is there. sometimes it clears up and pulls hard again, sometimes it stay bogging unless i stay at a stable rpm.im thinking its an ignition problem. any ideas would be appreciated.
Old Nov 8, 2009 | 02:38 PM
  #2  
JDMTURBOZ's Avatar
Thread Starter
n00b
 
Joined: Nov 2009
Posts: 6
From: TIMMINS
Default

ok . so i changed the plugs, wires, fuel filter and cleaned the air filter. bog is almost all gone. had to order cap and rotor, should be in soon. also noticed my a/f ratio is very high. maybe a 02 problem???
Old Nov 8, 2009 | 08:58 PM
  #3  
D.T.P's Avatar
Moderator

iTrader: (3)
 
Joined: Apr 2009
Posts: 2,551
From: maple
Default

Does rpm jump around when starts bogging? OR is it smooth? Could be dizzy.
Hopefully new cap/rotor will fix it.
Old Nov 9, 2009 | 05:32 PM
  #4  
XNXIXTXRXOX's Avatar
Member
 
Joined: Jun 2009
Posts: 862
From: Sauga City
Default

i had a problem like that. i had to hold my car at 3 grand for like 5 secs then gun it. other wise it would bog a bit. it was my o2's, but my tps was also messed. so it could have been either. unplug your tps and go for a drive. you'll get a cel but its will run fine, cus it just uses the other sensors to calculate a/f ratio. thats how i found out mine was fucked. it ran pretty good with it unpluged.
Old Nov 9, 2009 | 06:33 PM
  #5  
dc2integra's Avatar
n00b
 
Joined: Nov 2009
Posts: 92
From: Toronto
Default

have you done any work on the distributor before the bog started?
Old Nov 26, 2009 | 05:27 PM
  #6  
JDMTURBOZ's Avatar
Thread Starter
n00b
 
Joined: Nov 2009
Posts: 6
From: TIMMINS
Default

thanks i will try that
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mak-B
Integra Technical Questions and Tips
5
May 7, 2007 04:33 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:37 AM.