Integra Technical Questions and Tips Tech discussion for all things Acura Integra

shift.

Thread Tools
 
Search this Thread
 
Old 12-20-2008, 11:30 PM
  #1  
Junior Member
Thread Starter
 
aryan's Avatar
 
Join Date: Aug 2008
Location: sauga
Posts: 242
Default shift.

hi all,

just got done an engine swap by a pro mechanic. got a problem here though, my friend says its related to car battery but i just wanna double check. i can shift into any gear smoothly when the car is shut off. i can't shift into any gears easily when car is running/idling but when i tap on the gas pedal only then i can shift into required/desired gear. also, i can shift easily while in motion into any gears. does it really have to do anything with battery? p.s. earlier the engine wouldnt start until i pushed the gas pedal couple of times.
p.s. clutch looks fine. its new and so is tranny.

Last edited by aryan; 12-20-2008 at 11:34 PM.
aryan is offline  
Old 12-21-2008, 01:31 AM
  #2  
n00b
 
MDL-EST-BEAST's Avatar
 
Join Date: Apr 2007
Location: AJAX
Posts: 60
Default

ask your pro mechanic,usually when you get a swap done the cars soppose to work after.
MDL-EST-BEAST is offline  
Old 12-21-2008, 03:03 AM
  #3  
Member
iTrader: (3)
 
black_ac_gsr's Avatar
 
Join Date: Jan 2007
Location: hamilton
Posts: 794
Default

take it back and ask whoever did the swap but the only thing i can think of is that your clutch is not fully disenaging and your trying to get into gear but when you rev it your almost shifting clutchless just matching your speeds of your input and counter gears so it makes the shift just not smooth
black_ac_gsr is offline  
Old 12-26-2008, 02:23 AM
  #4  
Junior Member
Thread Starter
 
aryan's Avatar
 
Join Date: Aug 2008
Location: sauga
Posts: 242
Default

i dunno whats wrong man. i took it back to the mechanic and told him the shifter was never this stiff/rough and all he told me was when he did the engine swap he opened the tranny and clutch, sanded and cleaned the clutch so therefore the clutch dropped due to cleaning which is normal and that is why ur shifter is not like before. Sounds B.S. i dont have any cable issues either becuz its hydraulic clutch, one mechanic told me it might not be sitting properly, the clutch. anyhow, this morning it wasn't starting at first attempt but it did when i lowered the handbrake and i dont think it has any connection with that. also shifter feels perfect when car is in motion i can shift into and forward gears or proper gears. and sometimes the shifter feels so smooth..i drove it to montreal and got back realized shifter is smoother than before. anyways at the moment i am so broke to pay for any other repairs. i dunno if changing clutch oil should resolve the problem one guy said my clutch oil looks dirty. by the way is battery in any way related to shifter or clutch, currently i am running 2 12inch subs from the battery and headlights and dashboard lights dim when i am cranking my subs. i know i need a capacitor but thought its battery causing the problems. sorry i am car noob.
thanks
aryan is offline  
Old 12-26-2008, 02:55 PM
  #5  
Member
iTrader: (3)
 
black_ac_gsr's Avatar
 
Join Date: Jan 2007
Location: hamilton
Posts: 794
Default

no battery can't cause that you just need a capacitor and your lights wont dim. Clutch fluid is just hydraulic brake fluid same as in your brake lines and it wont caus this unless there is air trapped in somwhere in the line from your clutch master cylinder and the slave cylinder wich deactivates the clutch pressure plate. Sanding the flywheel is not going to cause this either so i dont know what he's talking about. Hand brake also has nothing to do with starting the car.
black_ac_gsr is offline  
Old 12-27-2008, 02:07 AM
  #6  
Junior Member
Thread Starter
 
aryan's Avatar
 
Join Date: Aug 2008
Location: sauga
Posts: 242
Default

thanks ^ for the reply...i guess i'll have to live with this since i can't afford anymore repair costs...well its not too bad now shifter is better sometimes..
aryan is offline  
Old 12-29-2008, 06:01 AM
  #7  
Junior Member
 
Kloos_teg's Avatar
 
Join Date: Jun 2008
Location: london
Posts: 136
Default

i would just try bleding the system.. see if there is any air left in it.. worth a shot.
Kloos_teg is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dolechy596
Integra Parts For Sale
16
08-07-2007 08:34 AM



Quick Reply: shift.



All times are GMT -5. The time now is 02:16 AM.