Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Rattle comming from engine bay.. any ideas?

Old May 9, 2006 | 07:34 PM
  #1  
KleenGiz'R's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2005
Posts: 482
Default Rattle comming from engine bay.. any ideas?

Whats up ppl.. i hope this isn't anything more then a heatshield.. but by the looks of it i doubt it. Here is the problem while driving, at around 3700-4000rpm I start to hear a rattle of some sort, and if you pass 4000rpm it goes away. but regardless what gear im in i hear a rattle at those rpm, i stopped and popped the hood and rev'd it up and i heard the rattle again.. but i cant pin point where its comming from? Any ideas? i checked to see if any heat sheilds are lose, everything seems to very tight.

Any help is appreciated
thanks guys
Old May 9, 2006 | 08:02 PM
  #2  
jesse's Avatar
Junior Member
 
Joined: Dec 2003
Posts: 207
From: london, on, ca
Default

my header bolts tend to come loose once in awhile, get under your car and check the 3 holding in the middle of the header
Old May 9, 2006 | 08:43 PM
  #3  
HKJ's Avatar
HKJ
Senior Member
 
Joined: Mar 2003
Posts: 2,043
From: richmond hill
Default

^header bolts, or the bolts holding up the exhuast piping. also, check your shifter linkage.
Old May 9, 2006 | 11:57 PM
  #4  
WildoutWhiteGSR's Avatar
Time to become a Premier Member!
 
Joined: Aug 2003
Posts: 4,816
From: Whitby
Default

cat crapping out
Old May 10, 2006 | 08:38 AM
  #5  
KleenGiz'R's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2005
Posts: 482
Default

Originally Posted by WildoutWhiteGSR
cat crapping out
you think so? hmm anyway to tell for sure? I will check the header bolts but i doubt thats it.

thanks for the quick replies guys!
Old May 13, 2006 | 04:44 PM
  #6  
XTC's Avatar
XTC
Junior Member
 
Joined: Jul 2004
Posts: 106
From: TORONTO
Default

hey i have the same problem too on my gsr....its not the heat shields on the exhaust cuz i took them all off......its a gear in the tranny thats worn out.......cuz the oils doesnt properly reach back there .....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
93Da_Chik
Meets and Events
37
Apr 10, 2008 10:04 PM
midnight_breeze33
Integra Technical Questions and Tips
11
Feb 18, 2006 06:26 PM
Speed King
Integra Technical Questions and Tips
4
Nov 22, 2005 09:24 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:44 AM.