power window problem
#1
power window problem
Ok i finally want to get around and finish this.
I have power windows in my 94LS and when i first bought the car the passenger door window motor was broken. I didnt feel like fixing it at the time but i think its time to get it done.
I took of the door pannel to see what the problem was and found that there was a metal rod holding the window up and the motor was missing along with the control arm that lifts the window. I bought a used passenger side window/motor from someone but when i came around to installing it i cant find the wires. To me it looks like the previous owner totally cut them out or i just cannot find them. I tried looking everywhere inside the door but i still cannot find them. Anyone have any idea what i should do, i want to avoid the mechanic unless someone knows a really good one that is very cheap. I just spent almost 400 on fixing my tail lights if you guys read my thread.
I couldnt find any previous threads about this so dont get mad smartass
If anyone could help out in directing me to a fix i would greatly appreciate it, thanks!
I have power windows in my 94LS and when i first bought the car the passenger door window motor was broken. I didnt feel like fixing it at the time but i think its time to get it done.
I took of the door pannel to see what the problem was and found that there was a metal rod holding the window up and the motor was missing along with the control arm that lifts the window. I bought a used passenger side window/motor from someone but when i came around to installing it i cant find the wires. To me it looks like the previous owner totally cut them out or i just cannot find them. I tried looking everywhere inside the door but i still cannot find them. Anyone have any idea what i should do, i want to avoid the mechanic unless someone knows a really good one that is very cheap. I just spent almost 400 on fixing my tail lights if you guys read my thread.
I couldnt find any previous threads about this so dont get mad smartass
If anyone could help out in directing me to a fix i would greatly appreciate it, thanks!
#2
A metal rod holding it up? Your better off just buying a whole door and just get it painted or try to get one the same colour. You need the scissors lift, motor, wiring harness it's too much work and would come out to more than just a door. Start scouring the junkyards.
Thread
Thread Starter
Forum
Replies
Last Post
NoToRiOuS_NinTegra
Integra Parts Wanted
2
01-22-2009 06:17 PM