Integra Technical Questions and Tips Tech discussion for all things Acura Integra

KYB GR-2 any good?

Thread Tools
 
Search this Thread
 
Old 09-12-2005, 07:41 AM
  #1  
Junior Member
Thread Starter
 
Cybertron's Avatar
 
Join Date: Aug 2004
Location: NorthYork
Posts: 133
Default KYB GR-2 any good?

Hi guys,

I need some advice, I have about 200k on my car and still on stock struts and springs.. I am thinking of putting in KYB GR-2 because its cheap. But I've heard that they aren't that great. Also another question is, can I use them with the stock springs? or how about H&R springs, will I need a camber kit?
Cybertron is offline  
Old 09-12-2005, 07:50 AM
  #2  
Post Whore
 
its me.. mario's Avatar
 
Join Date: May 2003
Location: n00bmarkit
Posts: 2,763
Default

gr2's are fine for OEM replacement.. i wouldn't consider them performance though..
its me.. mario is offline  
Old 09-12-2005, 08:53 AM
  #3  
Junior Member
Thread Starter
 
Cybertron's Avatar
 
Join Date: Aug 2004
Location: NorthYork
Posts: 133
Default

thats what I've been reading as well, people say they will blow with H&R because they give a drop of more than 1.5"
But my main question is will I need a camber kit if I go with the H&R, I heard that when ever a car is lowered a camber kit will be required.
Cybertron is offline  
Old 09-12-2005, 10:41 AM
  #4  
Time to become a Premier Member!
 
WildoutWhiteGSR's Avatar
 
Join Date: Aug 2003
Location: Whitby
Posts: 4,816
Default

Not true.

What is needed however is an alignment.
WildoutWhiteGSR is offline  
Old 09-12-2005, 11:06 AM
  #5  
Time to become a Premier Member!
 
Big Hairy Gino's Avatar
 
Join Date: Mar 2003
Location: MFE/956
Posts: 4,146
Default

Originally Posted by WildoutWhiteGSR
Not true.

What is needed however is an alignment.
+1 youre not going that low so getting a proper alignment right after you lower your car is gonna be more beneficial than a camber kit.

Camber Kits = Overrated
Big Hairy Gino is offline  
Old 09-12-2005, 11:36 AM
  #6  
Junior Member
Thread Starter
 
Cybertron's Avatar
 
Join Date: Aug 2004
Location: NorthYork
Posts: 133
Default

I see some cars after lowering their car, the front or rear tires are slanted.. looks like its gonna fall off or something.
Well I bought the GR-2's off ebay this morning for $270 total. Just thinking now if I should get the H&R springs or just stick with stock springs.
Cybertron is offline  
Old 09-12-2005, 12:04 PM
  #7  
Time to become a Premier Member!
 
WildoutWhiteGSR's Avatar
 
Join Date: Aug 2003
Location: Whitby
Posts: 4,816
Default

Only you can decide what u would like to do with your money. But the H&R Sport or the OEM Springs will work with those shocks.
WildoutWhiteGSR is offline  
Old 09-12-2005, 08:00 PM
  #8  
Junior Member
Thread Starter
 
Cybertron's Avatar
 
Join Date: Aug 2004
Location: NorthYork
Posts: 133
Default

is 1.5 in the rear and 1.75 in the front drop a lot?
I've never lowered my car before so I am all new.. if anything I am thinking of using KYB GR-2 with H&R springs. Anyone had this settings before?
Cybertron is offline  
Old 09-12-2005, 10:12 PM
  #9  
Senior Member
 
engsr's Avatar
 
Join Date: Mar 2003
Location: Earth
Posts: 1,326
Default

There are a few that run that set-up or something similar to that. The front will probably leave you with a finger gap or less. The H&R Sport actually drop about 2" front and 1.75" rear after they settle a bit. If you don't want a drop like that and want something less aggressive you can go with the H&R OE Sport (0.75") or the Eibach Pro-Kit (1.3").

Regarding the camber kit - you don't need one. It's pretty much if you think you need it.
engsr is offline  
Old 09-12-2005, 10:29 PM
  #10  
n00b
 
Pimpin-EL's Avatar
 
Join Date: Sep 2003
Location: Toronto
Posts: 42
Default

i have the KYB gr-2 application w/H&R srpings, I killed 2 sets of my rears in 2 months....there was no camber in the begginning, and later it juss went sooooo cambered it looked like i was on air....So now i have an ingalls camber kit....Don't cheap out on suspension, its juss not worth it, they feel fine on corners, but go like 100-120 n every lil bump, ur car bounces like MAD....But my buddies Camry has the same setup as me n hes doing fine....
Pimpin-EL is offline  
Old 09-13-2005, 01:21 AM
  #11  
Time to become a Premier Member!
 
JEFFOS69's Avatar
 
Join Date: Mar 2003
Location: GTA
Posts: 3,072
Default

GR2's arent too good. Theyre like stock.
JEFFOS69 is offline  
Old 09-13-2005, 03:55 AM
  #12  
Time to become a Premier Member!
 
WildoutWhiteGSR's Avatar
 
Join Date: Aug 2003
Location: Whitby
Posts: 4,816
Default

Originally Posted by Pimpin-EL
i have the KYB gr-2 application w/H&R srpings, I killed 2 sets of my rears in 2 months....there was no camber in the begginning, and later it juss went sooooo cambered it looked like i was on air....So now i have an ingalls camber kit....Don't cheap out on suspension, its juss not worth it, they feel fine on corners, but go like 100-120 n every lil bump, ur car bounces like MAD....But my buddies Camry has the same setup as me n hes doing fine....

Question is did you get an alignment.....


I have a camber kit in the rear and out of all the alignments, they don't bother touching it.

Camber will not wear tires in 2 months, toe will!
WildoutWhiteGSR is offline  
Old 10-07-2005, 02:09 PM
  #13  
n00b
 
chip's Avatar
 
Join Date: Sep 2005
Location: Mississauga
Posts: 3
Default

Regaurds to the GR-2's... in my opinion there garbage i'v replaced them twice in about a year(the rears only haven't had a problem with the fronts yet).....
chip is offline  




All times are GMT -5. The time now is 10:45 AM.