JDM Folding Action Side View Mirrors
Guest
Posts: n/a
JDM Folding Action Side View Mirrors
Has anyone installed the JDM folding action side view mirrors on their car? I can install the hardware without any problems but I need some serious help with the wiring. I'm totally lost. I have done tons of research and didn't end up with much clear write-ups.
Last edited by D C 2; Mar 14, 2008 at 10:58 PM.
Guest
Posts: n/a
I'm supposed to connect both mirrors together through a wire but don't know which one and run wires into the relay but I am actually not clear where exactly the relay goes. Also the JDM and USDM wire codes are different (experiencing from what I've heard and searched on the net).
Last edited by D C 2; Mar 16, 2008 at 07:45 AM.
Guest
Posts: n/a
Time to become a Premier Member!
Joined: Mar 2003
Posts: 3,446
From: .....................................................
all u need to do is use the harnesses off of you usdm mirrors and follow the wiring parts the mirror control wires are the same for usdm to jdm so it will not matter all u need to do is wire the folding feature up and that is simple +,- to blck and white wire on each jdm mirror then wire the relay up to the orange or yellow wire on your radio --- and the negative on your radio as well the green wire from the mirror control button goes to the relay.
tada....
tada....
Time to become a Premier Member!
Joined: Mar 2003
Posts: 3,446
From: .....................................................
Guest
Posts: n/a
^ LOL .. yeah i already had that one in but i just wanted to make sure if someone on TI has actually done the wiring before because i obviously don't want to toast up my relay lol u guys know that it's expensive and hard-to-find. So I would rather ask around while looking stupid but make sure that i do it right though. Not all the write-ups on the internet are trustable sometimes. thanks anyways guys.
