JDM Folding Action Side View Mirrors
Has anyone installed the JDM folding action side view mirrors on their car? I can install the hardware without any problems but I need some serious help with the wiring. I'm totally lost. I have done tons of research and didn't end up with much clear write-ups.
|
Would any of you guys know any shops that could wire these mirrors .. ?
|
They come with a switch?
|
With a switch and a relay. I will be posting pictures if that might help in any way.
|
I'm supposed to connect both mirrors together through a wire but don't know which one and run wires into the relay but I am actually not clear where exactly the relay goes. Also the JDM and USDM wire codes are different (experiencing from what I've heard and searched on the net).
|
I can wire them up, I did it on my Integra about 6 years ago, if I can remember :lol:
|
Originally Posted by Blue Dragon
(Post 208012)
I can wire them up, I did it on my Integra about 6 years ago, if I can remember :lol:
Where and when can we meet up? PM me your contact info. |
still looking guys. HELP !!!
|
check team-integra. i think they have a write up on there about them.
|
all u need to do is use the harnesses off of you usdm mirrors and follow the wiring parts the mirror control wires are the same for usdm to jdm so it will not matter all u need to do is wire the folding feature up and that is simple +,- to blck and white wire on each jdm mirror then wire the relay up to the orange or yellow wire on your radio --- and the negative on your radio as well the green wire from the mirror control button goes to the relay.
tada.... |
|
^ LOL .. yeah i already had that one in but i just wanted to make sure if someone on TI has actually done the wiring before because i obviously don't want to toast up my relay lol u guys know that it's expensive and hard-to-find. So I would rather ask around while looking stupid but make sure that i do it right though. Not all the write-ups on the internet are trustable sometimes. thanks anyways guys.
|
Sorry man, I checked for the diagram for you, and I can't find it.
|
it's okay but thanks a lot for looking ....
|
All times are GMT -5. The time now is 01:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands