Integra making noise
03-25-2008, 11:42 AM
#1
Member
Thread Starter
Join Date: Dec 2007
Location: GTA
Posts: 832
Integra making noise
I have a 2000 integra. I am hearing a screeching noise from the front on the left side. I believe it is the roater or somthing is stuck on the breakpad.
Also I hear a tick tick tick tick tick noise. I think that is my belt.
What are your opinions
Also I hear a tick tick tick tick tick noise. I think that is my belt.
What are your opinions
03-25-2008, 05:20 PM
#2
n00b
Join Date: May 2007
Location: Mississauga
Posts: 23
The hearing noise from the left side could be your brakes being low on life or wheel bearing... also look on your brake master and check the condition of the fluid in the reservoir. Having low brake fluid is a sign of low brakes... And that ticking noise check each belt carefully might need replacing or here's what you can also do... Start your car, open the hood and grab a long screw driver(prefer flathead) and hold that steady into a place where you think its making noise, now put your ear and listen, then you will now exactly what is... Try putting it on the valve cover and listen...
Last edited by autotechStar; 03-25-2008 at 05:28 PM.
03-25-2008, 05:28 PM
#3
Member
Thread Starter
Join Date: Dec 2007
Location: GTA
Posts: 832
My breaks are fine. I changed them a few months ago. I dont want to take a flathead and put it against the belt...i would rather take it into a shop. Thanks a lot for your reply. Now i know what might be the problem.
any more replys from other people???
any more replys from other people???
03-26-2008, 09:36 AM
#6
Member
Thread Starter
Join Date: Dec 2007
Location: GTA
Posts: 832
Most of the time is happenes when i 1st start the car....but sumtimes when im driving and i stop it makes a noise 2...
03-31-2008, 10:47 AM
#11
n00b
Join Date: Feb 2007
Location: etobicoke
Posts: 99
that noise on the rotor could be rust trapped behind the heat shield, see if you can get under and try and look for that.... the ticking are the vales staying open and they're not seated properly... you may need a valve adjustment, take it to a shop if you don't know how to do it yourself
03-31-2008, 11:28 AM
#13
Guest
Posts: n/a
I think i got mine done from Acura Woodbine. Came out to $148.50 + tax - 10% off. Just don't play stupid and tell them to give you a reasonable price. They always give out 10% off when I get something done and sometimes 15% when you're getting some major work done.
Last edited by D C 2; 03-31-2008 at 11:31 AM.
03-31-2008, 11:33 AM
#14
Guest
Posts: n/a
Thread
Thread Starter
Forum
Replies
Last Post