Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Idle Problem

Thread Tools
 
Search this Thread
 
Old 10-24-2006, 01:32 PM
  #1  
Xo1
n00b
Thread Starter
 
Xo1's Avatar
 
Join Date: Jun 2006
Location: GTA
Posts: 5
Default Idle Problem

Hi,

im running a b18b in my 1999 Civic EX with obd1 p75. On cold start, the car idles between 1500-1700rpm. When i touch the gas lightly it revs higher, stays there for like 2 seconds then drops back to 1500 again. Sometimes it jumps up and down irradically but when the car is at operating temperature it runs fine and idles normally. Also, when at normal temperature the temp gauge drops a bit after like 20 mins or so and starts runnning rich at 1500rpms then gets warm again. When i put a P2T(Sir) OBD2b ecu in, the car runs perfect. idle is perfect but runs fine, its just not as strong as the p75 and cuts off at 6500 cuz of vtec. So doesn't this mean the IACV and FITV is fine?. iacv 2-wire fix was done, coolant topped and no bubbles.

I don't understand why a P2T obd2b would run perfect but my p75 obd1 has irradic idle & dropping temperature readings

Any suggestions? could it be the ECU?
Searched all the forums and none relate to the fact that when i put a different ecu in, it idles perfect.
Xo1 is offline  
Old 10-24-2006, 09:48 PM
  #2  
Time to become a Premier Member!
 
WildoutWhiteGSR's Avatar
 
Join Date: Aug 2003
Location: Whitby
Posts: 4,816
Default

Get the car tuned, or your have hooked a wire up incorrectly. Or could still be looking for a second 02 sensor...
WildoutWhiteGSR is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pornstartom
Integra Technical Questions and Tips
12
11-23-2005 12:34 AM
pornstartom
Integra Technical Questions and Tips
12
06-07-2005 11:59 PM



Quick Reply: Idle Problem



All times are GMT -5. The time now is 01:51 AM.