acurreo

Much thanks in advance:

Anyone know how I can disable my corner lights without disabling the turn signals?

In other words, I dont want the corner lights to be on all the time, only when I'm signaling left and right.

While on the topic, any idea how I can turn on my OEM fogs independatly, without the need to turn the low beams?

Currently, the fog lights only work IF the low beams are ON, not when they are OFF, and NOT when the high beams clicked ON.

Aidez-moi!

engsr

The cheap easy way for "disabling" the turn signals is to use a single filament bulb in place of the dual filament. I'm not sure which one it is though. I remember I burnt out a dual filament once and it had the effect that you're describing.

As for the fog lights - the easiest way would be to hard wire the fogs directly to the battery, using a relay with a manual switch (assuming the OEM interior one).

nautica_t YO

Bryan is correct, those are the easiest posiblities.

if your fogs were pre-wired when you bought it, than the wire is on the steering column, but you can follow the wire and trace it.
i have my oem fogs hooked up independently.

acurreo

Bryan,

You are a true G. Much thanks. Thanks for setting the direction....

Will do this....