Integra Technical Questions and Tips Tech discussion for all things Acura Integra

flywheel weight

Old Oct 10, 2005 | 03:53 PM
  #1  
96GSR's Avatar
Thread Starter
Member
 
Joined: Jun 2003
Posts: 517
From: Newmarket
Talking flywheel weight

What aftermarket flywheel weight are u guys using?

Talked to a couple friends who tried convincing me not to get a 9lbs flywheel because it really isn't for the street. To use a 12lbs instead.

I guess i'd really have to get in someones car and try it out for myself, to see what i'd like.

Opinions? Suggestions?
Old Oct 10, 2005 | 04:32 PM
  #2  
WildoutWhiteGSR's Avatar
Time to become a Premier Member!
 
Joined: Aug 2003
Posts: 4,816
From: Whitby
Default

I have a Act Prolite 8lbs flywheel. It's easy to drive. As you know I daily drive my car.


The only thing you have to get used to is change your driving habbit to shift faster. That's about it. Oh and rev match your downshift.

The revs just drops faster than oem.
Old Oct 10, 2005 | 11:20 PM
  #3  
WOT's Avatar
WOT
n00b
 
Joined: Jul 2005
Posts: 11
Default

I've used a Jun 11 lb chromoly steel flywheel and I can tell you from first hand that if you want the rpms to go up fast, get the lighter flywheel. Don't buy the "you want the inertia for the heavier flywheel for daily driving" sales pitch.

My problem with the Jun was that because it was made for a JDM starter, it was incompatible with the North American starter motor teeth and that would chew the FW teeth and cause the motor not to start over time. After about a year, I had to roll the car forwards about 2 feet in neutral first to get the 2 teeth rows to align before firing up the ignition to allow the starter to catch.

When I finally removed it, you could see the bevel of the FW teeth were badly damaged from the harder metal on the starter teeth.

some people had to machine a bevel on the edge to prevent that.

Nowadays most of the major FW's sold from US companies like ACT don't have that issue.

If you want your rpms to fly up like a bike's, get the 8-9 lb FW.

Do you autocross or solo1?
Old Oct 11, 2005 | 09:03 AM
  #4  
96GSR's Avatar
Thread Starter
Member
 
Joined: Jun 2003
Posts: 517
From: Newmarket
Default

I haven't autocrossed, but i plan to next year.

Thanks for the input
Old Oct 11, 2005 | 03:27 PM
  #5  
FuzzyLS BRO's Avatar
There's plenty to do outside my room but I choose not to!
 
Joined: Mar 2003
Posts: 7,392
Default

i have a 9lbs flywheel, you notice a big difference, your car revs alot quicker, i have no complaints.
Old Oct 11, 2005 | 09:05 PM
  #6  
WOT's Avatar
WOT
n00b
 
Joined: Jul 2005
Posts: 11
Default

the misinfo is usually that you can go too light but that's from a drag racing bias about FW launch inertia.

for autocrossing, a lighter FW makes the car more forgiving if you lose momentum.
Old Oct 11, 2005 | 09:16 PM
  #7  
non-VTEC's Avatar
Member
 
Joined: Apr 2003
Posts: 563
Default

lighter is better no matter what anyone else says.........8lbs flywheel here.......daily driven for the past 3-4 years with it.........if i could go lighter i would.....
Old Oct 12, 2005 | 03:49 PM
  #8  
Mikes_teg's Avatar
Junior Member
 
Joined: Apr 2003
Posts: 157
From: Milton
Default

8lbs ACT flywheel here. As was mentioned before, only difference is your going to have to shift faster to keep the shifts smooth.


And no... It doesn't rev up like a bike or even close to one.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:20 AM.