Integra Technical Questions and Tips Tech discussion for all things Acura Integra

car nearly died

Old May 10, 2008 | 07:03 PM
  #1  
high-octane's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2005
Posts: 251
From: Toronto
Default car nearly died

Hi Guys,

While driving today my car's rev dropped and it looked it was going to die.
I put the car in neutral and reved the car a little bit.
It didn’t work at first, after a couple tries, all it came to life.

No sure what this could be.
Also noticed that my rev meter shows its sitting at 500 at idle while before it used to be 800.

Any idea what this could be or how to troubleshoot this?

Last edited by high-octane; May 10, 2008 at 09:57 PM.
Old May 12, 2008 | 05:34 AM
  #2  
high-octane's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2005
Posts: 251
From: Toronto
Default

i am very lost on how to fix this.
Help anyone?
Old May 19, 2008 | 01:48 AM
  #3  
high-octane's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2005
Posts: 251
From: Toronto
Default

ok folks,
I took in my car and the mechanic told me it was my distributor cap. i had my spark plus, rotor and cap replaced.
Car had been running ok for 2 days when it happened again.
I am really running out of ideas now. What could this be?
The difficult part is that it does not happen all the time.
When it happens, if I shift to neutral and press the gas, the car revs up fine.
Any thoughts people, I really need some help please.

Could this be a bad o2 sensor?
Its a 95 ls, can i pull out codes
Old May 19, 2008 | 10:52 AM
  #4  
MechEng's Avatar
n00b
 
Joined: Mar 2006
Posts: 78
From: Toronto
Default

clean your IACV
Old May 19, 2008 | 11:56 AM
  #5  
ls/vtec's Avatar
Member
 
Joined: Nov 2007
Posts: 548
From: Toronto
Default

raise the idle a bit
Old May 19, 2008 | 11:58 AM
  #6  
blacktegra's Avatar
n00b
 
Joined: May 2008
Posts: 28
From: toronto
Default

should be your IAC valve .

Last edited by blacktegra; May 19, 2008 at 02:20 PM.
Old May 19, 2008 | 07:49 PM
  #7  
high-octane's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2005
Posts: 251
From: Toronto
Default

checked vacuum leaks - none
added some injector cleaner
timing seems to be ok since this only happens sometimes.
compresstion- havenot tested it, however i think it should be ok since it only has 120,000km an it does not die all the tme.

Going to go ahead and change the fuel filter.

Is it possible there is water in my gas line?
is there a tester for this?
Old May 19, 2008 | 09:50 PM
  #8  
95'Teg_4dr's Avatar
n00b
 
Joined: Feb 2008
Posts: 44
From: Ottawa
Default

they have an additive that can be dumped into your gas tank that can remove it... gas line antifreeze, its real inexpensive. Changing a fuel filter is never a bad idea but i would still go ahead and do what blacktegra said as that may be the case and its inexpensive to do also.
Old May 19, 2008 | 11:52 PM
  #9  
high-octane's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2005
Posts: 251
From: Toronto
Default

how do i check the IAC valve?
Can the oxygen sensor cause these problems?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cdev0519
Integra Technical Questions and Tips
25
Jun 30, 2010 07:01 PM
ICEBOX
Integra Technical Questions and Tips
18
Dec 23, 2008 05:22 PM
blown90b16teg@11psi
Integra Technical Questions and Tips
3
May 30, 2008 11:46 PM
tai_
Integra Technical Questions and Tips
31
Jun 1, 2007 02:04 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:20 AM.