Camber problem...Need Help
#1
Camber problem...Need Help
Ok guys i know all of you who had lowered their teg must have had this problem..at some point.
My teg is lowered 2" front and 2.25" rear and now my tires look like this / \
Now i know installing a camber kit is 1 solution...
I also heard that most guys just use washers to push the tires out..
So has anyone here ever tried this??
IF SO
How to do it?? How would I know what size Bolts and washers i will need..
and how reliable is this washer technique.
Thanks
My teg is lowered 2" front and 2.25" rear and now my tires look like this / \
Now i know installing a camber kit is 1 solution...
I also heard that most guys just use washers to push the tires out..
So has anyone here ever tried this??
IF SO
How to do it?? How would I know what size Bolts and washers i will need..
and how reliable is this washer technique.
Thanks
#3
There's plenty to do outside my room but I choose not to!
iTrader: (2)
Join Date: Aug 2003
Location: The Hammer!
Posts: 8,166
the washer trick only works for the rear and you're too low for the washers to straighen them up anyways unless you get longer bolts. you're best off just getting camber kits for the front an rear and have it adjusted at an alighnment shop.
Thread
Thread Starter
Forum
Replies
Last Post
Opo
Integra Parts For Sale
3
06-04-2011 06:36 PM
psyman83
Integra Technical Questions and Tips
9
03-22-2011 08:35 AM
1sickda
Integra Technical Questions and Tips
6
10-31-2006 08:22 PM