Camber problem...Need Help
 

Ok guys i know all of you who had lowered their teg must have had this problem..at some point.
My teg is lowered 2" front and 2.25" rear and now my tires look like this / \
Now i know installing a camber kit is 1 solution...
I also heard that most guys just use washers to push the tires out..
So has anyone here ever tried this??

IF SO
How to do it?? How would I know what size Bolts and washers i will need..
and how reliable is this washer technique.

Thanks

get a camber kit u will be able to get a shop to do the adjustments the right way....

the washer trick only works for the rear and you're too low for the washers to straighen them up anyways unless you get longer bolts. you're best off just getting camber kits for the front an rear and have it adjusted at an alighnment shop.

get an alignment first!

thanks guys but my front is perfectly fine...
i think i will get my allignment done first


let the suggestions and comments coming