FS: 1996 K20A2 EK Civic HB
#1
FS: 1996 K20A2 EK Civic HB
It is finally time to sell my EK after a good 2.5 yrs of building this car from the ground up. The car is parked in a garage and barely driven. I only drive this car to shows basically. Car runs great and is in excellent condition. The purpose of the build was to build a civic that was different than the rest. Car will be parted out, however the buyer can add parts that he/she wants and the price would go up accordingly. The only thing the car needs is a new starter, as it takes a few cranks to get it to turn on sometimes. A lot of time & money has been spent on this project and it's time to move on from it. Car needs a good home!
To do the swap will cost approx $8000-$10000 including labour depending on what parts are being used. On top of that you will need a shell and whatever else you want to add to it. The price i am asking is pretty fair considering the cost to actually swap in a K20 from scratch.
Model: CX
Motor has about 70,000KM
Body has 260,000KM
HERE IS HOW THE CAR SITS NOW, UPDATED PICS TO BE ADDED SHORTLY
- Stock front bumper, side skirts, rear bumper w/type r style lip, mirrors, wing
- 5-Bolt conversion w/Stock ITR Calipers & Stainless Braided Lines
- Omni Power LCA's
- Stock K20 Valve Cover, Intake Manifold, Headlights
- Stock Seats, Gauge Cluster, Centre Console
- 99-00 SIR Dash, Climate Controls, Doors (PW, PM, PL)
- K20A2 Swap w/6-Speed Tranny
- JDM DC5R ECU
- 15" Steelies
PRICE: $10,500 E-Tested
PICS
Here are a list of parts that can be added to the base price:
EXTERIOR:
• Authentic JDM Rando Sports Full Aero Kit (96-98) - $1400
• Authentic Bomex Aero Spoiler (RARE)- $350
• Authentic Bomex Aero Mirrors (SUPER RARE) - $400
• Golden Eagle Rear Tow Hook (Polished) - $50
ENGINE & PERFORMANCE:
• JDM DC5 Type R Oil Stick - $20
• Custom Polished Valve Cover - $200
• Custom Polished Intake Manifold - $160
• Carbing Aluminum Cooling Plate - $120
• Spoon Sports Reservoir Cover - $10
• Suja1 Clutch Line - $40
UNDERCARRIAGE:
• Cusco Zero-One Coilovers - $700
• Skunk2 Pro Series Front Camber Kit - $180
• Ingalls Rear Camber Kit - $100
• Spoon Sports Front Strut Bar - $180
INTERIOR:
• Recaro Rails & Sliders (EK) - $250
• Takata Belt Pads (1 Set) - $100
• JDM CTR EK9 Gauge Cluster (97XXXKM) - $400
• JDM CTR EK9 Rear Seats - $250
• JDM EK4 Armrest Cover + SIR Armrest - $100
• JDM Honda Access Roof Console - $90
• OEM Honda Airbag Block off Tray - $50
IN-CAR ENTERTAINMENT:
• Pioneer AVIC-N3 In-Dash Navigation - $675
• Pioneer CD-IB100-II iPod Adapter - $50
HERE IS A LINK TO MY PARTS POST WITH DETAILED DESCRIPTIONS & PICTURES OF ADDITIONAL PARTS:
https://www.torontointegras.ca/forum...ad.php?t=35612
LOWBALLERS WILL BE IGNORED
Please do not msg me if you are not SERIOUS. No Test Pilots.
DEPOSIT WILL BE REQUIRED TO HOLD CAR FOR BUYER.
Located in Mississauga
Justin
416-846-3152
To do the swap will cost approx $8000-$10000 including labour depending on what parts are being used. On top of that you will need a shell and whatever else you want to add to it. The price i am asking is pretty fair considering the cost to actually swap in a K20 from scratch.
Model: CX
Motor has about 70,000KM
Body has 260,000KM
HERE IS HOW THE CAR SITS NOW, UPDATED PICS TO BE ADDED SHORTLY
- Stock front bumper, side skirts, rear bumper w/type r style lip, mirrors, wing
- 5-Bolt conversion w/Stock ITR Calipers & Stainless Braided Lines
- Omni Power LCA's
- Stock K20 Valve Cover, Intake Manifold, Headlights
- Stock Seats, Gauge Cluster, Centre Console
- 99-00 SIR Dash, Climate Controls, Doors (PW, PM, PL)
- K20A2 Swap w/6-Speed Tranny
- JDM DC5R ECU
- 15" Steelies
PRICE: $10,500 E-Tested
PICS
Here are a list of parts that can be added to the base price:
EXTERIOR:
• Authentic JDM Rando Sports Full Aero Kit (96-98) - $1400
• Authentic Bomex Aero Spoiler (RARE)- $350
• Authentic Bomex Aero Mirrors (SUPER RARE) - $400
• Golden Eagle Rear Tow Hook (Polished) - $50
ENGINE & PERFORMANCE:
• JDM DC5 Type R Oil Stick - $20
• Custom Polished Valve Cover - $200
• Custom Polished Intake Manifold - $160
• Carbing Aluminum Cooling Plate - $120
• Spoon Sports Reservoir Cover - $10
• Suja1 Clutch Line - $40
UNDERCARRIAGE:
• Cusco Zero-One Coilovers - $700
• Skunk2 Pro Series Front Camber Kit - $180
• Ingalls Rear Camber Kit - $100
• Spoon Sports Front Strut Bar - $180
INTERIOR:
• Recaro Rails & Sliders (EK) - $250
• Takata Belt Pads (1 Set) - $100
• JDM CTR EK9 Gauge Cluster (97XXXKM) - $400
• JDM CTR EK9 Rear Seats - $250
• JDM EK4 Armrest Cover + SIR Armrest - $100
• JDM Honda Access Roof Console - $90
• OEM Honda Airbag Block off Tray - $50
IN-CAR ENTERTAINMENT:
• Pioneer AVIC-N3 In-Dash Navigation - $675
• Pioneer CD-IB100-II iPod Adapter - $50
HERE IS A LINK TO MY PARTS POST WITH DETAILED DESCRIPTIONS & PICTURES OF ADDITIONAL PARTS:
https://www.torontointegras.ca/forum...ad.php?t=35612
LOWBALLERS WILL BE IGNORED
Please do not msg me if you are not SERIOUS. No Test Pilots.
DEPOSIT WILL BE REQUIRED TO HOLD CAR FOR BUYER.
Located in Mississauga
Justin
416-846-3152
Last edited by j_limitz; 12-05-2008 at 08:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post
j_limitz
Integra Parts For Sale
8
03-05-2009 11:36 AM