There's plenty to do outside my room but I choose not to!
Nice Retrofit, and nice clean lines.
I'll be at Kennedy Commons tonight (with the Toronto Protege Club) on the north side of the lot around 9 to 9:30 depending on weather if anyone wants to see.
Junior Member
hey Jackson did u end up going to kennedy?? it was all rainy today so i didnt bother and doubt many ppl went :S will u b going next week??
Quote:
Zero work was done to the housing. It's definitely not the plug and play ----.Originally Posted by 04marathon
What work was required, if any, on the housings? Or is it plug and play?
Quote:
I swung by but no one was there!Originally Posted by KjB
hey Jackson did u end up going to kennedy?? it was all rainy today so i didnt bother and doubt many ppl went :S will u b going next week??
Not sure about next week as I might be in Montreal.
All the work was done by me.
I posted here too but I'll give you the gist of it : S2000 AP1 Retrofit - Team Integra
Went from the worst headlight system (stock) to:
- buying brighter bulbs (Xtravision)
- highbeam bulb swap
- buying auxillary driving lights
- then added a HID kit (ugggh - pure crap)
- did a TSX retrofit
- now changed to one of the best headlight systems - a S2000 retrofit.
I had to paint the reflector bowls black b/c I rear ended someone and cracked them. They are held together by glue and covered up by the Krylon paint!
The S2000 projector housing is naturally black, but I painted them even blacker with the BBQ paint. I left the lens holder unpainted in it's natural silver color.
For the highbeams, there are 2 pieces to the reflector bowls. I painted the outer ones black, left the real reflector bowl intact. Sort of a black eye effect.
The TSX system took me 2 days.
I managed to do the S2K projectors in 13 hours not including the 8 hours afterwards fine tuning the rotational adjustment.
So TSX:
Projectors $150 CDN
+ nuts and bolts, and miscellaneous parts = $60 CDN
+ extra set of headlights = $100 CDN
+ BBQ spraypaint = $8 CDN
+ Krylon Black spray paint = $8 CDN
+ Prolumen 35w Galaxy kit = about $200 CDN
+ Genuine Phillips 85122+ bulbs = $65 USD barely used.
+ tonnes of patience and research = priceless
For S2000:
Projectors (depends on year) mine were the "best ones" year 2000 AP1 with flat area in front of sheild and clear lens = $450 CDN (usually these are worth $400+ USD)
+ nuts and bolts and high strength threadlocker = $60 CDN
+ another set of internal light brackets = $40 CDN
and I just used everything else from the TSX retro.
I posted here too but I'll give you the gist of it : S2000 AP1 Retrofit - Team Integra
Went from the worst headlight system (stock) to:
- buying brighter bulbs (Xtravision)
- highbeam bulb swap
- buying auxillary driving lights
- then added a HID kit (ugggh - pure crap)
- did a TSX retrofit
- now changed to one of the best headlight systems - a S2000 retrofit.
I had to paint the reflector bowls black b/c I rear ended someone and cracked them. They are held together by glue and covered up by the Krylon paint!
The S2000 projector housing is naturally black, but I painted them even blacker with the BBQ paint. I left the lens holder unpainted in it's natural silver color.
For the highbeams, there are 2 pieces to the reflector bowls. I painted the outer ones black, left the real reflector bowl intact. Sort of a black eye effect.
The TSX system took me 2 days.
I managed to do the S2K projectors in 13 hours not including the 8 hours afterwards fine tuning the rotational adjustment.
So TSX:
Projectors $150 CDN
+ nuts and bolts, and miscellaneous parts = $60 CDN
+ extra set of headlights = $100 CDN
+ BBQ spraypaint = $8 CDN
+ Krylon Black spray paint = $8 CDN
+ Prolumen 35w Galaxy kit = about $200 CDN
+ Genuine Phillips 85122+ bulbs = $65 USD barely used.
+ tonnes of patience and research = priceless
For S2000:
Projectors (depends on year) mine were the "best ones" year 2000 AP1 with flat area in front of sheild and clear lens = $450 CDN (usually these are worth $400+ USD)
+ nuts and bolts and high strength threadlocker = $60 CDN
+ another set of internal light brackets = $40 CDN
and I just used everything else from the TSX retro.
I'll be at KC this Wed.
I'll be the guy sporting this hat and possibly smoking a cigar....
I'll be the guy sporting this hat and possibly smoking a cigar....
n00b
Quote:
I'll be the guy sporting this hat and possibly smoking a cigar....
Action ill be there...look for a silver integra Originally Posted by Action Jackson
I'll be at KC this Wed.I'll be the guy sporting this hat and possibly smoking a cigar....
Quote:
Yeah b/c there's only 1 Silver teggy at KC!!! Originally Posted by mindbogger
Action ill be there...look for a silver integra
I'll be at the North end with the all the Protege's.
