nice integra.
 

holy crap, this one is nice and clean....

Attachment 21545

Attachment 21546

Attachment 21547

Holy Crap Helllzzzz Ya Thats Hawt!

you can even jump start it without opening the hood :P

i like that!

I just saw that on HT. Damn...shits on fire!!

It should be a 10/10....the guy obviously put a LOT of work into cleaning up the car....then fucks it all up with a windshield banner and other stickers?

So that knocks it down to 8/10.....but then its got an Accord front end too.

Final result.....7/10

Meh

hmm not quite man, not too tough on the puke beige colour or rims, but nonetheless, its quite clean

its clean but its pretty ugly.

definitely clean. but not feeling the color.

its look like custard...

or maybe custard thats like old? n went bad so now is darker colored.
other then that it looks nice.

Do I spy spoooons?

What are those two plugs at the back? The red and black?

Yea, clean but not feeling colour or rims...

I love how nobody is feeling the colour....
Prolly cause it's not your overplayed blue, red, yellow, white, vsm, black, etc.....

Needs an R wing.

I'm with Arthur. The colour is very original, but still subtle.

^something that is highly sought after but rarely achieved.

i really like this color and always wondered what it would look like on a integra. the cream color sets the car off. it's different and subtle and relatively unique and it's sort of a boring, nondescript color, but it works extremely well with the spoon calipers and the polished cp-r wheels and the other subtle exterior mods like the J's bumper scoop and the visors...

i can't find anything i really dislike about this car... it's so nicely done.

Mmmm its....... unique...

James

wow soo sexy. im loving the jdm front and and the cpr's

I'm loving it too and thanks for confirming the Racing Hart speculation. Maybe you can confirm something else. Are those battery terminals on the rear?

Man, polished cpr's with smurf blue clappers look damn good.

they look like battery terminals:
http://static.summitracing.com/globa...ay-21504_w.jpg
idk, maybe he wanted some fancy connector for his block heater or something.

get nicer rims and loose the ghey stickers and that car would be awsome! i think the colour is cool.

i dunno..the rims arent my taste

Very nice car but not liking the colour too much

Don't like the rims, stickers or window deflectors.... Otherwise it's nice (Even though without those things it's just a wingless JDM front teg) but that's how I like em :)

not feeling the colour.......maybe if it had diffrent wheels on it to make it more "stealth"

gunmetal or dark bronze wheels would looke hot on that.....

wow. no love for this car here LOL SMOOTHE is the only one i think i agree with. This car is gorgeous, the CP-R, colour. Everything.

i like that colour its unique, not something i'd do but i give points to the guy for that, and the two things on the rear of the car indeed are battery terminals, apparently this is the "NEW" thing now, i dunno?

colour is real nice and those spOOn clappers set it off. i must admit, i hated those rims to death at first but now they are growing on me.

i like it. the colour is nothing that jumps out at you which i like, it's not a F&FLOOKATMEIGOTAFLASHYPAINTJOBSOICANPICKUPGOLDDIGG ERCHICKSWITHNOBRAIN kinda paint job. i like the rims too. the windshield banner could go, it's not like it can't be taken off.

LOL,and what were we talking about last night......hahahaha perfect for the strip in hamilton by the lake

I want to find these rims and buy them.

love it. eggshell-y/beige looks unique on an integra. only seen it on an eg hb before.

I love the colour. Not liking the rims or the rear battery terminals though. But the colour is sex.

CPFs have been around forever, people are just starting to like them now? There was a set for sale locally a while back, but its a 4x114.3 bolt pattern.

^I've never seen them in 5-bolt for sale in Canada ever. I guess I could always find them in cali.

it's the little things with that car that set it off. like how he shaved that front licence plate mount smooth. adds a real clean look to it IMO.

CP-F were never made in 5 bolt that i am aware of, i've never seen them.
CP-R is my fav. rim ever...:mad: mine better get here soon.

here's a set in cali. only thing is that they're 16x8, 32 offset for 2g. at least they're 5 lug...
http://www.cackywheels.com/wheels/16...lver_cpr_3.JPG

^Those would look hawt! Link?

http://www.cackywheels.com

They've got some nice stuff!

Cackywheels is overpriced.

The only places i've found online, besides private sellers, to buy wheels like that are ICB Motorsports, Cackywheels, and memoryfab.com. MemoryFab is the only one i would recommend, when inquiring about wheels, i was treated poorly by both other places. ICB motorsports wanted to charge $800USD to ship 4 wheels alone from Cali to Ontario :nonono:

That offset would look crazy tho. Just like Alex' 16 x 8 TE37's.

$800 is steep for shipping. Shouldn't be over $200USD i think.

it would be even crazier as alex's te37s are +38.

i wonder if it's possible for a wheel repair shop to take a couple of mm off the hub with a lathe.

possible, but who knows if thats safe.
Yeah those rims would look nice. but youd have to be higher than I am or run lots of camber. I tried a 5mm spacer on mine and it rubbed pretty bad.

rims from cali are so overpriced. $800 for shipping!wtf

Usually you can machine a few MM off the hub surface, as long as there's enough meat on them.

10mm on those +32s is a bit much though.

Only one way to find out.....BUY THEM!

actually there are a couple people who run very low offset wheels and are slammed. theres that thread on h-t.com with lots of examples...

yes someone should buy those wheels, though expensive, they are very nice.

Or you just could cut the fenders and get some flares......!

true
since jeff already has the jdm frontend, he can get the jsracing flares

Alex, what offset are your TE's?

Jeff posted above. +38

My new wheels are +38 too :D

very nice

the plugs are for running with out a battery, track cars that never drop rpm's can run with no battery if driven well. it saves 5-10 pounds over the lightest batteries and with a god alternator and ignition setup you'll see no losses in spark.. but it's over car for a car that isn't track only.

:yeah: :rockon:

^Prolly gonna be the biggest unveiling this spring

Ship them to buffalo along with tires from tirerack or check out an online vendor via H-T, jdm universe, team-integra. Or go in on a group buy for tires in your size get them mounted at wal-mart.

You can drive down and run on steelies and worn tires. You just come back with some new shoes and tires but stay in the states for a day or the weekend ( as NOT to show attention). Tell them that you are going to visit the Seneca casino, US falls, the US state park or Darien lake. Ive done it many timeswhen I don't have a scheduled road trip/fligght to see family in the states.

Even with the time, gas and work it's still way cheaper since the cdn $ is strong and you save on shipping, taxes (GST) AND duties.

either the USPS depot or the many small "mailbox" or usaddress places avail over the niagara/buffalo border. ICBmotorsports can do it cheaper if you get someone down there (if you are asian you MUST have a family member [i.e cousin, gf family member, long lost uncle lol ]in SoCal to pay $ always trumps a "no" - that is from experience I bought a lot of new JDM Honda parts from them back in 02/03 new to flip on honda/import sites.) They even have a vendor who works at ICBmoto on H-T.

^ Its not just that, ICB picks and chooses who they sell wheels to, which is kind of a stupid practice IMO. They are well known for that.

Cackywheels got back to me and the said it would be around $150 USD for shipping.

Glenn, We'll have to talk at the FYAO meet about getting ---- shipped from Cali. ;)