eh2 hatch= My new project
 

Hey guys i'll update this thread as i go along with my project. Got the car for a good price (1995 vx or cx I DONO) and jumped on it when i saw the underbody and how new it looked, especially the fuel lines :o Only rust the car had was the rear quarter panels :thumbup:

how i got it first

Attachment 19494

Attachment 19495

Attachment 19496
Attachment 19497

mint custom sunroof done by previous owner about 6 years ago, NO rust nor leaks :thumbup:
Attachment 19498
Attachment 19499

Tuned by razo= No more tunning BABY ;) :crook:
https://i10.photobucket.com/albums/a...%20civic/d.jpg


first thing i did was send the car in for paint and quarter panel removed. well after two and a half weeks of waiting and checking it out everyday here's the outcome:

Attachment 19500

Attachment 19501

Attachment 19502

Attachment 19503

https://i10.photobucket.com/albums/a...c/DSC00563.jpg

removed the ugly ass tails, shaved the wiper and took the damn tint off, now HOW THE HELL do i get all those damn tint glue off, i tried everything =(
Attachment 19492
Attachment 19493

use goo gone. Nice work


Wanna be a part of project boost EG over the winter?

Any other plans for it?

thanks. This car will be my daily so it'll prolly stay N/A. First has to be brake setup/suspension. looking for 5bolt if i can get a good deal or i'll just do gsr brakes. for motor setup leaning towards b20 with sir tranny or h22.

i thought eh's were the flatback civics

ya, what are EH Civics?

reza, look here: http://thisoldhonda.org/vindecoder.php

looks good.:yeah:

they are variants of the 5th generation japanese market "eg" chassis civics.

Trennell is right about Goo Gone. That stuff takes off the most stubborn things! Just make sure you don't try to cheap out on it though. Use as much as you have to and be patient (I know this from de-badging part of my car's rear).

The car looks good. Is that a stock colour for those Civics? It kinda reminds me of my own (Eternal Blue Pearl) but it's darker.

looks good man, your on the way to a sick project!

thanks man, so its a cx.


I gotta give this Goo Gone a try. Yes it's a stock colour, you see it alot on the 4 door 92-95 civics but not alot on hatches.

paint thinner works as well. I use it at my shop to get sticker glue off of my batteries :)

(probably not as good as goo gone, but it does the job:yeah: )

looks like its coming along really nice... good stuff

looks good for a civic, you DA traitor!

Don't waste your time on goo gone, go to Home depot and get a large tin of Acetone. It should look purple when you pour it out and evaporate really quickly. I used it to take off the glue from pin striping and it eats away at any film/plastic such as tint or pinstripes or decals. It's not expensive at all, it's like 8.00 a tin. Put some on a rag and dab it over the window, let it sit for about 3 min and then soak the rag some more and wipe it all off.

hehe. thanks

oh and about the glue tint i actually used the acetone stuff you said man, my mom suggested to me earlier, and it worked like a charm.

ok got some amber corner and amber sidemarkers. bought f2 coils 10k front 6k rear with blox rear control arms. Now i tried installing the rear coilover now and took one bolt that connects the shock to the control arm out. than it started pouring like a bitch so had to stop working on the car so quickly put everything back on except that bolt!!! is it safe to still drive with the car like that since it's only one side in the rear?

OptionJDM gave me a great deal :yeah:
http://i10.photobucket.com/albums/a1...%20civic/8.jpg
Attachment 19454
http://i10.photobucket.com/albums/a1...%20civic/6.jpg
Attachment 19455
Attachment 19456
Attachment 19457
Attachment 19458

wery nice :)

you gotta put that bolt back in dude. it's there for a reason.

yea man, not safe at all!

but i did see the car on the road..paint work looks really clean mang! lemme know if you want that rear disc conversion.

thanks man but the paint really isn't that good. needs a good wetsand and polish. about the rear disc i'm broke right now but i'll definetly keep you in mind.

BTW fuzzy i gonna pm you right now.

nice project reza, pick up an si lip asap

Ya im lookin for one badly. are you coming to the meet tomorow?

yeah i'll be there, you going?

ya man. i'll see you there. I just can't figure out HOW THE HELL To adjust my damn coilover. is it to late to lower it once it's installed in the back?

Update:

put on my suspension and lowered it, the ride is really good not too bouncy.

Attachment 19340
Attachment 19341

^^damn you came to the meet for like 30 seconds and I barely got to blink before you left....

lol it felt like 30 seconds cuz you where so damn busy!! i was actually there for close to 4 h.

^^really? Damn....I must have been super busy then...:GrinDev:

update got some 15x6.5 ssr and installed my spooM mirrors
Attachment 19237
Attachment 19238
Attachment 19239
Attachment 19240
Attachment 19241
Attachment 19242
Attachment 19243
Attachment 19244
Attachment 19245

nice wheels man car look HAWT, i like it that my fav type of civic, if i was to own one it would be an EG

thanks bro. means alot

mod slow man, don't rush it


otherwise it looks really good

good prog. clean.

wow car looks great man!

thanks guys. What colour would look good for the wheels? im thinking silver

damn man, those rims really compliment the car!

Can't go wrong w/ Silver for the wheels IMO. Also look into Gold w/ polished lip.

thats a noice car good work on the project so far

SSR rims :O oldschool Ftw

thank you guys for the comments. i just removed all the subwoofer wirings and other bs. i weighed them and intotal 15 pounds of wires in my car :o

k now you can give em to me

n' paint your rims asap

LOL, my coolant is empty so that means in 1 day and half i burned off all my coolant. I NEED ENGINE.

installed new lip, rear mudflaps

Attachment 19062
Attachment 19063

looks like its coming along reallll nice... I like the way it looks

Good job saving this car. Im not a huge fan of meshy wheels, IMO a nice set of bronze or white wheels will set the car off. It'll give it some contrast.

Car's durty. GJ reza :yeah:

Thanks guys.

I'm saving up for a nice set of wheels i have in mind.

here's a couple better pics

Attachment 19049
Attachment 19050
Attachment 19051

wow, reza... that looks really good, so simple and clean. :yeah: :yeah:

are those the ssr reverse meshes?

a spoon duckbill would really complete the exterior.

ya ssr reverse meshies. I'm already looking into a duckbill. Thanks for the comment

Yes the car has made dramatic improvement over the course of a short time. Paint looks mint, can't wait to see it with the rims you want.

great job so far. Ill always love eg hbs.
I have a jdm sir2 spoiler and jdm clear corners if your interested.
spoon duckbills are nice, but you lose your 3rd brake light and I've almost been rear ended a couple times. something to consider.

what kind of lip is that?

wow. progressing quickly man. Im guessin engine will be next yr rite! :howudoin:

Thanks guys, and yes engine will hopefully come april next year.
thanks alex. The sir2 spoiler is it the same length as the stock one on my car but only difference is it has the longer 3rd brake light? pm me how much you would like for the corners btw.

thanks. btw what is your new project man?

Looks good - get the Si coupe front lip.

Edit - seen it with a lip in later pics, looks pretty good man

the sir spoiler is a little longer and has a slight flare.

http://www.hondamarketplace.com/zerothread?id=1659965
mine is the 92-93 version with the 2 piece look (like pictured)where as the 94-95 version is a one piece look.

found a pic
http://www.beaconautobody.com/galler...serialNumber=2