DC with LOTS of JDM parts
Hey fellas. I posted some pics of my car last fall. Lots has changed over the winter so I felt like updating. Comments and critique on both the car and photo's are welcomed and encouraged (both positive and negative). I'll be more active here this year! Cheers!
Before http://img229.imageshack.us/img229/9...ction2siy5.jpg NOW! 1. http://img153.imageshack.us/img153/6...nnabe1saq1.jpg 2. http://img246.imageshack.us/img246/9...nnabe2smg4.jpg 3. http://img182.imageshack.us/img182/4...nnabe3sst9.jpg 4. http://img170.imageshack.us/img170/7...nnabe4sfj0.jpg 5. http://img403.imageshack.us/img403/6...nnabe5sga0.jpg These were in my apartment waiting when I took these pics, they're now on the car 6. http://img152.imageshack.us/img152/7112/dsc0099rc1.jpg 7. http://img206.imageshack.us/img206/6226/dsc0100nk4.jpg 8. http://img182.imageshack.us/img182/7902/dsc0105hj7.jpg Plans for this summer: Rays extended lugs JDM ITR center console (the rear part by the e-brake) Swap carpet (from grey to black) JDM ITR door pannels JDM ITR cf trim pieces JDM ITR red honda badges Spoon calipers Spoon rotors Stainless braided lines Thanks for looking everybody :P |
looking good
|
looks good. keep up the good work.
|
sex on wheels!
|
Originally Posted by A-Rogue
(Post 222863)
Comments and critique on both the car and photo's are welcomed and encouraged (both positive and negative).
Plans for this summer: Rays extended lugs JDM ITR red honda badges otherwise, the car is sweet and probably one of the nicest i've seen posted here in a while. |
Looking good!
so nice and clean! but just a suggestion, i would not recommend using Ray's Lug nuts on stock OEM ITR wheels as it would not seat properly on the rim itself. other then that your car is looking very clean! |
no motor to go with that beast wtf?...its a nice teg but drop a a k motor or sumtin in there ...
|
Originally Posted by XTC
(Post 222994)
no motor to go with that beast wtf?...its a nice teg but drop a a k motor or sumtin in there ...
Modifications: Engine/Trans: B20b bottom end(re-sleeved) balanced JE pistons (84.5) 11.1 comp B18b Port n Polished Head Milled 15thous Crower 403's/springs/ret Fluidyne radiator b16 Trans ACT street clutch lighted flywheel Energy Suspension Engine mounts Top Fuel Intake AEM Fuel Rail/Regulator AEM Cam Gears Comptech Stainless 4-2-1 5zigen titanium header-back exhaust ITR TB Skunk2 Intake manifold hondata s200 http://img212.imageshack.us/img212/5114/dynona2.png Thanks for the advice on the lugs fellas |
Originally Posted by XTC
(Post 222994)
no motor to go with that beast wtf?...its a nice teg but drop a a k motor or sumtin in there ...
|
Originally Posted by DJINFERNO806
(Post 223009)
Pwned...
|
lol i wasn't referring to you getting pwned stooge, but rather XTC since he thought u were running stock...
|
Originally Posted by DJINFERNO806
(Post 223012)
lol i wasn't referring to you getting pwned stooge, but rather XTC since he thought u were running stock...
|
Wow its making that much power to the wheels and no vtec. Thats pretty respectable. High Five!
But it seems to take off after 5200 rpm as if vtec crossover had engaged, thats tripping me out lol. |
Originally Posted by A-Rogue
(Post 223008)
Thanks for the advice on the lugs fellas
if you want some lug nut blingage and still be safe, look into a set of s2000 cr lugnuts and locks. they come in black. |
Originally Posted by DJINFERNO806
(Post 223018)
Wow its making that much power to the wheels and no vtec. Thats pretty respectable. High Five!
But it seems to take off after 5200 rpm as if vtec crossover had engaged, thats tripping me out lol.
Originally Posted by dc24me
(Post 223020)
:yeah:
if you want some lug nut blingage and still be safe, look into a set of s2000 cr lugnuts and locks. they come in black. |
Love that steering wheel! I want one of those so bad!!! lol Nice and clean car.
|
I've been lookin' for that since ages .. still lookin'
|
Originally Posted by D C 2
(Post 223121)
I've been lookin' for that since ages .. still lookin'
|
Yeah
|
Originally Posted by D C 2
(Post 223132)
Yeah
|
nice! go for a brembo big brake kit. those red honda badges are darn expensive i paid 40 each for brand new one's from honda. good luck findin' cf door switches. i found mine after 6 months of search lol. finding every other cf part was easy.
|
GREAT looking car. The white ITR rims match nicely! Don't think there's anything I dislike about it :D Keep it up!
|
Originally Posted by D C 2
(Post 223135)
nice! go for a brembo big brake kit. those red honda badges are darn expensive i paid 40 each for brand new one's from honda. good luck findin' cf door switches. i found mine after 6 months of search lol. finding every other cf part was easy.
|
where's his shop? post the name and location. it might come handy to others as well
|
He's in the process of moving the shop. I can help out and put you in contact if needed.
|
Originally Posted by B18C5er
(Post 222871)
looks good. keep up the good work.
|
Awesome non-VTEC numbers, A-Rogue.
http://img206.imageshack.us/img206/6226/dsc0100nk4.jpg BTW, where did u get your VC painted/powdercoated? |
nice lookin car....the GM looked a bit better than the white wheels but it still nice regardless.
btw what colour is ur paint? |
Originally Posted by SIC1
(Post 223188)
*Cough*someone misses there JDM DB8 ITR inspired Integra.
|
Originally Posted by Project X
(Post 223201)
Awesome non-VTEC numbers, A-Rogue.
http://img206.imageshack.us/img206/6226/dsc0100nk4.jpg BTW, where did u get your VC painted/powdercoated? A buddy of mine is a painted. Did it in his garage in one day for $75:yeah: and IntegraJoe, the colour is cypress green pearl |
That's very nice... clean man :)
|
very nice and clean!! just stay with the stock rotors(unless you can get the spoon rotors cheap ), and stock lugs or get the CR lugs from the States.
|
clean! i want your rims damnit.
|
All times are GMT -5. The time now is 02:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands