Back at it...
#1
Back at it...
Hey guys, it's been a while since I posted...
The mod bug went away for a bit, I moved houses and had to sell cars, work was busy, blablabla... but I'm back!
For those that don't know, I picked up an 02 IS300 back in November last year, but have been driving it stock... until this week! I started collecting parts for it about a month ago and finally had a chance to go tinker with the car. I'll be doing alot to it in the next couple weeks, but I just wanted to share my Stage 1... wheels, brakes, coilovers, i/h/e, engine dress-up.
Here's a sneak peak of what's going on so far:
http://img.photobucket.com/albums/v1...00/Hella_2.jpg
http://img.photobucket.com/albums/v1...00/Hella_3.jpg
http://img.photobucket.com/albums/v1...00/Hella_4.jpg
http://img.photobucket.com/albums/v1...00/Hella_5.jpg
I'm putting my flame suit on because I know alot of people here probably don't like the stretched, hella flush, major negative camber look.
Stage 2 will consist of electronics & exterior so stay tuned!
The mod bug went away for a bit, I moved houses and had to sell cars, work was busy, blablabla... but I'm back!
For those that don't know, I picked up an 02 IS300 back in November last year, but have been driving it stock... until this week! I started collecting parts for it about a month ago and finally had a chance to go tinker with the car. I'll be doing alot to it in the next couple weeks, but I just wanted to share my Stage 1... wheels, brakes, coilovers, i/h/e, engine dress-up.
Here's a sneak peak of what's going on so far:
http://img.photobucket.com/albums/v1...00/Hella_2.jpg
http://img.photobucket.com/albums/v1...00/Hella_3.jpg
http://img.photobucket.com/albums/v1...00/Hella_4.jpg
http://img.photobucket.com/albums/v1...00/Hella_5.jpg
I'm putting my flame suit on because I know alot of people here probably don't like the stretched, hella flush, major negative camber look.
Stage 2 will consist of electronics & exterior so stay tuned!
#7
Have you already started accepting applications for official fanboy? I would like to apply. I can take pretty good cell phone pictures of you at various meets.
That is all thank you.
looking good those euro lights are gangsta!
That is all thank you.
looking good those euro lights are gangsta!
#8
Ride quality is top notch! Using Tein Flex, but I'm still waiting to install the EDFC next week. H-tech's should be decent, but it's always a good idea to run performance shocks with any lowering spring.
Front lip is a Gialla... the rest of the skirt package will consist of a TRD front grille, Wald sides, and a TRD rear lip.
I was expecting more stretch too!! I was so dissapointed when they popped on with no issues... I ended up going with a 235/40/18 on a 18x9.5"... what I should have done was go with either a 225/40/18 or a 235/35/18, but either of those would be deemed unsafe hahaha. They also don't look as stretched because of the rolled lip, next set of wheels will definitely had a stepped lip. The car looks insane rolling, the pictures just don't do the -4 degrees camber justice. I'm going to be running about a finger gap lower in the front when I get my adjustable front arms in... right now I could only get -2 degrees in the front when I ideally wanted -3.
I'm really not going all out... nothing will compare to the Del Sol so I won't even try haha.
Euro lights are the shizznit, I can't wait till a ricer pulls up and asks me where I got my Altezza's from.
canttx> YOU HAVE BEEN DECLINED
Front lip is a Gialla... the rest of the skirt package will consist of a TRD front grille, Wald sides, and a TRD rear lip.
I was expecting more stretch too!! I was so dissapointed when they popped on with no issues... I ended up going with a 235/40/18 on a 18x9.5"... what I should have done was go with either a 225/40/18 or a 235/35/18, but either of those would be deemed unsafe hahaha. They also don't look as stretched because of the rolled lip, next set of wheels will definitely had a stepped lip. The car looks insane rolling, the pictures just don't do the -4 degrees camber justice. I'm going to be running about a finger gap lower in the front when I get my adjustable front arms in... right now I could only get -2 degrees in the front when I ideally wanted -3.
I'm really not going all out... nothing will compare to the Del Sol so I won't even try haha.
Euro lights are the shizznit, I can't wait till a ricer pulls up and asks me where I got my Altezza's from.
canttx> YOU HAVE BEEN DECLINED
#10
oh?...oh..i see.....well....can i atleast have unofficial fanboy status?....you know like if we see each other at shows you give me the "nod" like were cool?
damn you smoothe! I'll be sure to "wander" into the background when you take pics of vince at the meets.
damn you smoothe! I'll be sure to "wander" into the background when you take pics of vince at the meets.
#16
Looks Nice Vince!
From the little i've been reading up on IS's apparently to swap in a full 2JZGTE swap is a bit of a battle, needing custom engine mounts and rediculous rewiring.
most from what i've seen have been either rebuilding their shortblock with Supra internals, or actually aquiring 2jzgte shortblock with 6spd tranny and bolting it up. minor work needed!
All in all, you have the perfect Platform to make a Baby Supra Beast! lol!
From the little i've been reading up on IS's apparently to swap in a full 2JZGTE swap is a bit of a battle, needing custom engine mounts and rediculous rewiring.
most from what i've seen have been either rebuilding their shortblock with Supra internals, or actually aquiring 2jzgte shortblock with 6spd tranny and bolting it up. minor work needed!
All in all, you have the perfect Platform to make a Baby Supra Beast! lol!
#17
Time to become a Premier Member!
Join Date: Mar 2003
Location: .....................................................
Posts: 3,446
#20
Guest
Posts: n/a
#22
http://www.dynamotorsports.ca/
Tony, just picked up a IS300, sexy car in person. Done perfectly if you ask me! Same GGP manual as well.
When I was there a few weeks ago he told me his car is making around 320RWHP at 8 psi, stock internals running off the BB T67 he was running in his Camry!
Not bad at all! I also learned IS300's dont use 100% dependant Drive by wire systems! Which is very apealing to me, as I dont trust drive by wire! lol
Tony, just picked up a IS300, sexy car in person. Done perfectly if you ask me! Same GGP manual as well.
When I was there a few weeks ago he told me his car is making around 320RWHP at 8 psi, stock internals running off the BB T67 he was running in his Camry!
Not bad at all! I also learned IS300's dont use 100% dependant Drive by wire systems! Which is very apealing to me, as I dont trust drive by wire! lol
#24
damn i think i saw ur car today parked at an undisclosed location in newmarket - looked to be some kind of wedding ...... if that was your car... DAYYUUUMM!!! and btw i just live literally around the corner! hahaha..
and of course there was this nice maroon coloured teg too..
and of course there was this nice maroon coloured teg too..
#25
Whoa Jimmy, that's SO wierd... boy, you really live in the boonies eh?
I was at my friend's uncle/aunt's house for their wedding tea ceremony... pretty funny how you passed by.
I was at my friend's uncle/aunt's house for their wedding tea ceremony... pretty funny how you passed by.
#27
ya wow! looked to be a pretty formal event.. i was actually heading out to get some groceries with the wife so on the way back i drove extra slow - i must've looked like i was scoping out cars to steal hahaha...
car looks amazing man!
Thread
Thread Starter
Forum
Replies
Last Post