2000 Acura Type R - $11,999
#1
2000 Acura Type R - $11,999
Category: Clean Title
Status: Import
I have a 2000 Acura Type R for sale, in Toronto - GTA.
Mileage: 70,000km
Asking price is $11,999
70,000k on the shell and less than 3,500k on the engine
Original type R, not a fake hypeR.
ENGINE
Brand new B18C5 short block (minus rods and pistons) sleeved to 2.0L+ (85.5mm x 87.2mm) by RS Machine
Entire rotating assembly balanced. (fuel cut: 9200rpm) The engine was also built to run on 91/100 octane, or E85.
ARP engine stud kit; ARP head stud kit
Arias custom cast pistons; 11.5:1 (coated piston tops and skirts)
Ferrea polished stainless steel competition valves
Crower rods
JUN III cams and valve springs
Toda Cam gears
Supertech Ti retainers
Walbro 255lph fuel pump
AEM FPR
B&M FP Gauge
RC 440cc injectors
RPM Service 72-70mm throttle body
DTR-FAB custom stainless 4-2-1 header w/ HPC thermal barrier coating
Mugen baffled oil pan
HPC oil-shedding coating inside the valve cover
Accusump 2 Qt. oil accumulator (not currently connected)
JAZ vented catch cans w/ drain valves (two)
FAL racing fans (custom fabrication to retain A/C)
Koyo aluminum racing radiator
Samco silicone hoses
Mugen cooling system package
Toda high-power clutch/light-weight flywheel
JDM ITR 4.7 final drive
Extrude Hone, port matched, flow benched ITR intake manifold
Hondata S300 engine mgt., thermal barrier intake manifold gasket
Viton valve guide seals
Comptech Icebox intake
Vi-Tek racing ignition wires
Work done by LDL and others:
port/polish; open up combustion chamber to match 85.5 mm bore; deshroud valve pockets; flow bench; 3 angle valve job; bronze guides; balance crankshaft and micro-polish journals; balance entire rotating assy.
LDL Custom Burns Stainless TIG welded 3" exhaust w/ 3” stainless Thermal Research muffler
Energy Suspension motor mount inserts and shift linkage bushings.
Spoon Magnetic drain bolt set
SUSPENSION
Mugen Lowdown Sport Suspension (5-way adjustable)
Mugen rear 26mm sway bar
Skunk2 Racing adjustable front upper control arms (new style)
SPC rear camber adjustment kits
Spoon Sports front and rear upper tower bars
BRAKES
Goodridge stainless steel brake lines
Axxis Ultimate racing brake pads
Brembo high performance rotors
WHEELS/TIRES
WORK RSZ-R Competition 15X7, 114.3, +43 offset
205/50-15 Nitto NT01 Tires.
ARP extended length wheel studs
INTERIOR
MOMO alloy pedals
Autopower 4-point bolt-in roll bar
Sparco EVO XL racing seats
Sparco/Schroth 5-point harnesses
JDM ITR e-brake center console replacement
Rear seats and seat brackets removed
Custom rear carpeting
Extras:
There are also two Acura OEM Integra Type R nose masks in perfect condition that come with the car, and also a cut and polished valve cover w/ HPC oil shedding coating. This car has to be seen to be appreciated; the paint has had a color sand and polish, and it gets routine applications of Zymol. The paint is as smooth as glass. This is show quality car that is also very fast around the track with the right driver. A California owned car since new;now in Ontario. Means it has absolutely no rust. The car originally produced 234whp on the Mustang Sport Compact Dyno
Also have a white MINT condition complete JDM front end. Will throw in for another 800$. Install for 1000$
pm only.
Toronto
Status: Import
I have a 2000 Acura Type R for sale, in Toronto - GTA.
Mileage: 70,000km
Asking price is $11,999
70,000k on the shell and less than 3,500k on the engine
Original type R, not a fake hypeR.
ENGINE
Brand new B18C5 short block (minus rods and pistons) sleeved to 2.0L+ (85.5mm x 87.2mm) by RS Machine
Entire rotating assembly balanced. (fuel cut: 9200rpm) The engine was also built to run on 91/100 octane, or E85.
ARP engine stud kit; ARP head stud kit
Arias custom cast pistons; 11.5:1 (coated piston tops and skirts)
Ferrea polished stainless steel competition valves
Crower rods
JUN III cams and valve springs
Toda Cam gears
Supertech Ti retainers
Walbro 255lph fuel pump
AEM FPR
B&M FP Gauge
RC 440cc injectors
RPM Service 72-70mm throttle body
DTR-FAB custom stainless 4-2-1 header w/ HPC thermal barrier coating
Mugen baffled oil pan
HPC oil-shedding coating inside the valve cover
Accusump 2 Qt. oil accumulator (not currently connected)
JAZ vented catch cans w/ drain valves (two)
FAL racing fans (custom fabrication to retain A/C)
Koyo aluminum racing radiator
Samco silicone hoses
Mugen cooling system package
Toda high-power clutch/light-weight flywheel
JDM ITR 4.7 final drive
Extrude Hone, port matched, flow benched ITR intake manifold
Hondata S300 engine mgt., thermal barrier intake manifold gasket
Viton valve guide seals
Comptech Icebox intake
Vi-Tek racing ignition wires
Work done by LDL and others:
port/polish; open up combustion chamber to match 85.5 mm bore; deshroud valve pockets; flow bench; 3 angle valve job; bronze guides; balance crankshaft and micro-polish journals; balance entire rotating assy.
LDL Custom Burns Stainless TIG welded 3" exhaust w/ 3” stainless Thermal Research muffler
Energy Suspension motor mount inserts and shift linkage bushings.
Spoon Magnetic drain bolt set
SUSPENSION
Mugen Lowdown Sport Suspension (5-way adjustable)
Mugen rear 26mm sway bar
Skunk2 Racing adjustable front upper control arms (new style)
SPC rear camber adjustment kits
Spoon Sports front and rear upper tower bars
BRAKES
Goodridge stainless steel brake lines
Axxis Ultimate racing brake pads
Brembo high performance rotors
WHEELS/TIRES
WORK RSZ-R Competition 15X7, 114.3, +43 offset
205/50-15 Nitto NT01 Tires.
ARP extended length wheel studs
INTERIOR
MOMO alloy pedals
Autopower 4-point bolt-in roll bar
Sparco EVO XL racing seats
Sparco/Schroth 5-point harnesses
JDM ITR e-brake center console replacement
Rear seats and seat brackets removed
Custom rear carpeting
Extras:
There are also two Acura OEM Integra Type R nose masks in perfect condition that come with the car, and also a cut and polished valve cover w/ HPC oil shedding coating. This car has to be seen to be appreciated; the paint has had a color sand and polish, and it gets routine applications of Zymol. The paint is as smooth as glass. This is show quality car that is also very fast around the track with the right driver. A California owned car since new;now in Ontario. Means it has absolutely no rust. The car originally produced 234whp on the Mustang Sport Compact Dyno
Also have a white MINT condition complete JDM front end. Will throw in for another 800$. Install for 1000$
pm only.
Toronto
Last edited by 01TypeR; 04-03-2011 at 02:39 PM.
#3
Bump. Over 25k in mods here. Your getting a great deal.
Cleanest type R in ontario guaranteed. Just came from Cali.
Cleanest type R in ontario guaranteed. Just came from Cali.
#4
Really nice car, I remember seeing this for sale back in 2009. Very good price and looks pristine...
#6
I will part it in a week from today if nobody buys it in that week. because I have EVERY SINGLE stock part in my shed. So I know I will make more then 12k if i part it, but i would like to see it how it is now go to another owner.
#10
Note: decided not to part it out EVER.
On saturday I will be getting the turbo installed, then tuned. Monday morning there will be new pics, new price and new whp
On saturday I will be getting the turbo installed, then tuned. Monday morning there will be new pics, new price and new whp
#12
Still on the fence about a couple shops. Might bring it to this place in detriot. I heard teknotick does it very well. I might call them and ask for prices.
#13
Try dynamotorsport in North York. The owner/tuner once had a high compression turbo build that was putting out really impressive numbers. I believe the CR was north of 12:1.
What shop in Detroit were you thinking about? Other options are Jeff Evans and Xenocron but they are all the way down in NY. 7-8 hours drive, but definitely worth it for tuning in my opinion.
What shop in Detroit were you thinking about? Other options are Jeff Evans and Xenocron but they are all the way down in NY. 7-8 hours drive, but definitely worth it for tuning in my opinion.
#16
i seen this on h-t in type r for sale section the other day seller was from vegas are trying to hype up as this is your car the car said pending sale at 15k so not sure what to believe. But if you do have this and indeed its yours i want to see other pics not same ones from forum with your name beside it. Then ill belive you are the seller
#17
Dont have time to chat at meets. I work days and nights. get 4 hours of sleep a day. Im off to bed now
Check pm. Short explanation. He put his thread back up to help me out.
i seen this on h-t in type r for sale section the other day seller was from vegas are trying to hype up as this is your car the car said pending sale at 15k so not sure what to believe. But if you do have this and indeed its yours i want to see other pics not same ones from forum with your name beside it. Then ill belive you are the seller
#18
Ill mark it as sold here. No traffic coming through this site. No use in selling a worth 25k teg to people on here. no offence
Thread
Thread Starter
Forum
Replies
Last Post