Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   turbo install question (https://www.torontointegras.ca/integra-technical-questions-tips-35/turbo-install-question-43408/)

holung 08-14-2010 08:45 PM

turbo install question
 
ok so i just bought a turbo kit for my car and i noticed that the manifold with the turbo is large and is too big to fit in front of my stock rad so my question is what is my options do i change my manifold or do i get one of thoes aluminum half rads i kinda want to keep my ac and full rad so is there a different manifold i can get that will fit behind the stock rad and fan?

blackRS 08-14-2010 09:36 PM

Im not a turbo expert, but i always hear of turbo guys going with the civic half rad to make room.

blackRS 08-14-2010 09:36 PM

oh and please tell me its not an ebay kit

Vida 08-14-2010 10:30 PM

You can use a civic half rad. Or you can get a new Mishimoto half rad. Also, if you get a new Mishimoto rad you will need to get a new fan for it. Pics of parts and specs on set up ?

D.T.P 08-15-2010 03:32 AM

As suggested a mishimoto half rad is a great solution.

Going to WeirTech for a custom manifold is also an option. I got some decent quotes for custom manifold. He could fabricate you one to clear ac components...

holung 08-15-2010 11:17 AM

Uh the kits from fpmotorsports I don't know if that's good or not and the turbo is a t3 t4 .50 trim or something like that

MPR 08-15-2010 11:44 AM

You don't need a new fan for the mishimoto rad. Just use one of the oem fans off the stock rad.

Can you post pics of the kit and all or most of the parts, like the manifold and turbo etc..? It will help us see what you have to work with...

If you want to keep your A/C and go turbo, it's going to be a tight squeeze. It can be done though.

Vida 08-15-2010 12:02 PM


Originally Posted by MPR (Post 323864)
You don't need a new fan for the mishimoto rad. Just use one of the oem fans off the stock rad.

Really? Because I know for the full size rad it doesnt bolt up right or something weird like that.

blackRS 08-15-2010 01:11 PM

ohh you got the one on special for $1400 .. i saw that on TCC

holung 08-15-2010 01:40 PM

Actually my buddy bought it from them then got rid of the car so he sold me the kit but he didn't have the down pipe or the intercooler piping

MPR 08-16-2010 08:45 AM


Originally Posted by Vida (Post 323866)
Really? Because I know for the full size rad it doesnt bolt up right or something weird like that.

Shouldn't be too hard. You can buy special zip-tie type universal clips to mount fans on rads. Or just make your own bracket...

My mentality is if it doesn't bolt up, I make it work, one way or another. lol :yeah:

kartheegan 08-17-2010 11:21 PM

yeah i met the fpmotorsports guy before..he sold me a clutch and its pretty good..he told me about his turbo but i wasnt so sure of getting it or not because i was unsure of the quality..hopefully its a good kit..let us know on how the kit is when you install it

ignazty 08-18-2010 02:01 AM

definitely i would like to see pics of the install.
and some numbers lol.
i saw that kit on kijiji and was kinda interested in how it is.
stupid question whats tcc??

Vida 08-18-2010 07:12 AM

^^ Toronto Civic Club. A sister forum of Toronto Integras

ignazty 08-25-2010 10:50 AM

how is that turbo install coming along?
looking to hear your comments before i buy mine

D.T.P 08-25-2010 03:24 PM

Not to hate on fpmotorsports, i talked to them many times, and not once have they told me any brands or even specific sizes of the turbo. For the price, it seems way way way too cheap. When you think about it, a good quality turbo will run you anywhere from 800-1300$ if not more, depending on size. How can the whole kit be priced at the same price as a good quality turbo itself?

just my $0.02

MPR 08-26-2010 10:26 AM

^I didn't want to say anything before, but have to agree with martin.

Just be very cautious with what you buy. Make sure the person doing the install has extensive experience and knows what there doing...

ignazty 08-26-2010 10:36 AM

yea i figured its not going to be brand names and stuff. but when i called in they said they have a 6 month warranty on the parts. wouldnt that stand for something?

MPR 08-26-2010 11:46 AM

^Is it 6 months from purchase, or 6 months after install?

6 months isn't very long.

holung 08-26-2010 03:27 PM

i still havent installed it yet funds are hurtin and i still didnt pick up a half rad or the down pipe or the intercooler piping but i will be doing this soon plus i had to see what i ran on the track at cayuga before i turbod it and i rand 1:38 and it was my first time ever doing time attack

ignazty 08-30-2010 03:08 AM

i believe it was 6 months after purchase.

1:38 i dont know if thats good or notbut good job
i still never did a single lap at cayuga :(

MPR 08-30-2010 09:51 AM

If you want to be faster on time attack, focus more on suspension setup, brakes and tires then power. Power is nothing if you can't use it. ;)

AcuratePaul 08-30-2010 11:48 AM

agree with the above statement.

holung 08-30-2010 12:22 PM

True I know I've already Upgraded all that's stuff already I just noticed it was the straight and back straight I was loosing alot of time comepared to other

MPR 08-30-2010 12:42 PM

^So you have your: roll rate, roll center, camber, caster, ride height, tow, damper settings all optimised....???

What's your setup? Spring rates, dampers, camber, sway bars? (just curious :) ) What tires are you running on the track?

holung 08-30-2010 01:09 PM

Oh I'm not saying I've done everything but I have f&f front strung bar cross drilled rotors and I'm running hurcules tires I'm not done yet I still want rear strut bar lower subframe and change the lower rear sway bar and I changed the lower control arms and I need a camber kit but for the setup I already have I thought it was sufficent enough but I felt everyone was making time on me on the straights

MPR 08-30-2010 03:11 PM

^You be surprised how much faster your lap times could be by improving the cornering speed. Higher cornering speed drastically improves average lap speeds which improves lap times.

By what you just told me about your setup, it sounds like your car is still pretty much stock. I know you asked about a turbo instal, but I love discussing and helping people with their suspension setups. How serious are you about tracking? How often do you hit the track?

Sorry, I don't mean to thread-jack...lol.

holung 08-30-2010 03:55 PM

No it's all good i'm always open to learn more I'm not a track junky but I do like to go when there are events but keep in mind its still my dd

MPR 08-31-2010 09:26 AM

Well, it sounds like your more in it for the fun. I could type a novel on track setups, but I'll refrain from doing so here...lol.

Below are just a few pointers, things to consider before adding more power:

-Flush/bleed entire brake system with DOT4 fluid
-Upgrade brake pads & rotors (cross-drilled/slotted rotors are not necessarilly better than smooth or grooved rotors. Won't explain why right now)
-Steel-braided flex-lines (the flexible brake lines from car to clipers)
-Replace ALL suspension/sway bar bushings with poly-urethane bushings
-Invest in a dedicated set of sticky track tires on seperate rims (no larger then 15") (up to you how sticky you want to go. There's the falken Azenis RT615's which are very sticky but also streetable. There's the toyo proxes RA1's (personal fav.) which are crazy sticky, street-legal but not recommended for the street as they won't last long. Or you can go full race-slick. The choice is yours.)

I'm not sure how much of that you have already done, but the difference all those things can make is quite significant.

Because your car is a dd, you'll want to keep the spring rates low enough to maintain a comfortable ride. This means you'll need to use larger sway bars (front and rear) to control and obtain the optimal roll-rate/wheel rate for cornering.

A turbo will make you faster, by straight speed alone, but you'll need to brake harder and earlier and your cornering speed will not increase. Corner exit will suffer as putting that much power down through the front wheels while still turning is very difficult, especially using street tires.

Don't get me wrong, I'm not trying to talk you out of doing the turbo install. I think it's cool you want to go turbo, and by all means... But I'm just trying to help you better understand what to expect. :)

holung 08-31-2010 11:25 AM

I really like your suggestions I'm basically on the same path your talkogg aboutivebeen in the process of changing all my bushings the only thing I really need to do is get a camber kit and what I'm really leaning towards is gettif some deticated track rims and tires I learned that after I tried out the tires I'm running now but forure right now my list is a camber kit and rear sway bar and lower rear sway bar lol I work at toys r us and I'm not hooked up by my parents lol and I'm still in college lol so I buy one part at a time bur as toyour suggestions I like the idea of the brake lines and flush I'll add that to the list as well. I heard there's another track day sometime in September so I hope I see sone people out there from the forum cuz I didn't see anyone out there at least not thatt I know of but hopefully I can up my times the next time around and I'm more so concetrating on my experience and skills I need to learn from just doing it thanks for all your input

jasonjai 09-13-2010 09:52 PM

did you trim the block webbing?

maybe you can get an a/c, and p/s compatible log style exhaust manifold, and downpipe, swap it out for yours. lots of the log style fit t3/t4 trims.

the only problem with doing this since you have a kit, is you might need a muffler shop to make an adapter between the cat and the downpipe if the new downpipe is too short, or if they need to cut it if it's too long.

you could also try a slimmer fan.

good luck!

holung 09-15-2010 10:35 PM

thanks for all the info on this topic when it comes to turbo's its just something i have never dealt with and it should be interesting i know i sound like a kid but im excited for the bov sound lol i found a aluminum half rad and fan and my birthday is this weekend hopefully someone will pop some bills my way lol probably not but now all i need is the piping and the down pipe which ill probably get made cuz i want the wastegate tube to also run into the downpipe cuz i read up if you dont police give you trouble and its not emission friendly or somethin like that but yea hopefully i can post some pics when i start and hope i can learn more about this

D.T.P 09-16-2010 06:52 AM

The downpipe thing, yes its illegal to have an open dump tube but so is running an open cat. Some people get bugged, some don't. I'd leave it open but its up to you.

Oh and they won't run your car for etest if you have an open dump tube.

MPR 09-16-2010 09:26 AM

Apparently a non-recirculating (vents to the open air) bov is ilegal as well... never had an issue with the MR2. Yet.


All times are GMT -5. The time now is 11:50 AM.


© 2024 MH Sub I, LLC dba Internet Brands