Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   Transmission (https://www.torontointegras.ca/integra-technical-questions-tips-35/transmission-18355/)

RKL 06-21-2006 11:40 AM

Transmission
 
i bought lucas transmission fix fluid for gear grinds and hard shifting iv looked everywhere to pour the transmission fluid in but i cant find it

do u kno where the transmission fluid is i drive a 1995 integra rs

Reza 06-21-2006 12:04 PM

its a dipstick with the top part red, simply pull it out put in a funnel and pour.

Buff4Prez Yo 06-21-2006 12:48 PM

this should do it

http://www.team-integra.net/sections...?ArticleID=301

RKL 06-23-2006 09:48 AM

i changed my transmission fluid to honda high quality synthetic transmission oil i didnt end up using lucas transmission fix fluid because i found out the one i bought was for auto.

after changing the fluid and driving around for a while i noticed i still have a gear grind from 2nd to 3rd and 3rd to 4th. this usully starts to happen after the car has been running for about 15 mins.

do u have ne ideas on what the problem is?

RKL 06-23-2006 09:56 AM

iv talked to someone about it and they say it may be caused by bad syncros and i might need to get my transmission rebuilt.

Buff4Prez Yo 06-23-2006 10:34 AM

yup that sounds about right

Frost YO[SMCR] 06-27-2006 02:14 AM

you might need a rebuilt.. honestly you can try GM Synchro Mesh this stuff is the best its got all the grinds outta my second gen transmission. You can read about this stuff on Honda Tech its well know ----:)

RRRex 06-27-2006 09:41 AM

I'm not a big fan of additives myself and have heard mixed reviews of Lucas products in the past. Try double clutching between gears and that should solve all your syncro issues if you have them. Just clutch into neutral, lift, then clutch again into gear. Ran half a season with fubared syncros from 2/3 and 3/4. Got pretty quick at it too. When I'm lapping I also double clutch to protect the syncros. It'll keep the damage minimal until you get new syncros installed.


All times are GMT -5. The time now is 09:48 PM.


© 2024 MH Sub I, LLC dba Internet Brands