scorpion

welll i picked up a side skirt from some weird guy anyway got a good deal couldnt say no to it and i liked the way it looks but anyhow today i decided 2 put it on and its just 2 long .. so if i cut any of the ends of it will look stupid because the ends have the nice shaping and curves towards it so i though what i need 2 do is cut it say from the middle take out say 3 inches offf than put it back togher somehow and it will loook perfect and still good any comments or though how i can possible do this thanks guy..

SMOOTHE

let a bodyshop do all the cutting.

scorpion

can anyone do this for me just let me know how much u want ...

and body shops are just to damn expensive this isnt something hard to do reallyy ..

nautica_t YO

if they screw up, they can pay to buy another one :P

midnight_breeze33

no offence..but next time you buy a part..make sure its for your car lol.

Gs-R-edline

I'm assuming its fiberglass....as long as the shape/ size doesn’t change drastically, measure what needs to be removed and cut from the left and the right around the center. Don't just take from one side unless your 110% sure the size doesn’t taper. I'm a strong advocate of the Dremel but you need to have a steady hand...once you have 2 pieces go out and acquire the necessary fiber glassing products....resin.. cloth..etc. its really not that hard, take a bit of time read into it, its straight forward. The hard part will be ensuring that when you set the 2 cut parts together they are perfectly straight. Depending on what the skirts are like you may want to build a jig to keep the parts perfectly aligned....however if the floor works you might want to just go with that. When you start, start small, just enough to hold it together....allow it to set.. inspect your work, if your happy then go all out. Obviously the side that people will see should only have a light application...of really just resin...you can go for strength at the back...more cloth..resin and so on. once this is all done.......sand as desired...spot filler for any imperfections. ..sand....prime....paint.

By the time all is said and done depending on how you value your time it might just be easier to get a shop to do it. Me...I would do it my self, but that’s just who I am. If I didn’t do it, I can’t take pride in it. As for body shops being expensive ....quotes are free, make some calls, drop by some shops.

Good luck with what ever route you take, and next time....check the part before you hand over the cash....


James