Rear Windshield Nozzle replacement
#1
Rear Windshield Nozzle replacement
Was wondering if anyone has ever replaced theirs?
I'm not sure what happened to mine but its missing now. I've taped it up for now so no water gets in.
To install a new one, do I need to remove the roof liner? Tips from someone who has done this before would be very helpful.
I'm not sure what happened to mine but its missing now. I've taped it up for now so no water gets in.
To install a new one, do I need to remove the roof liner? Tips from someone who has done this before would be very helpful.
#6
Just replaced the rear nozzle last night.
FYI for anyone that might do this in the future, you first pull loose either side's (pick one, the left or right side) rear quarter window panel near the top, just enough to remove the rear roof rubber molding. Once that rear roof rubber molding is removed, the roof liner will be flimsy that will give you enough room to access the rear nozzle tubing.
Also, if you have a sunroof, turn the round plastic roof button 90 degrees to unlock.
FYI for anyone that might do this in the future, you first pull loose either side's (pick one, the left or right side) rear quarter window panel near the top, just enough to remove the rear roof rubber molding. Once that rear roof rubber molding is removed, the roof liner will be flimsy that will give you enough room to access the rear nozzle tubing.
Also, if you have a sunroof, turn the round plastic roof button 90 degrees to unlock.
Thread
Thread Starter
Forum
Replies
Last Post
dgkn86
Integra Parts Wanted
0
12-17-2010 07:26 PM
integra12
Integra Parts Wanted
8
09-01-2010 09:23 PM
Cheetah
Integra Technical Questions and Tips
1
01-21-2009 12:11 PM