Rear Windshield Nozzle replacement
 

Was wondering if anyone has ever replaced theirs?

I'm not sure what happened to mine but its missing now. I've taped it up for now so no water gets in.

To install a new one, do I need to remove the roof liner? Tips from someone who has done this before would be very helpful.

More than likely, yes, unless you're able to hook up the washer fluid line then maybe pop the washer nozzle in.

That's my guess ...

You have to remove your headliner to do so, to hook the line back up.


It's a bitch

Thanks guys, was hoping I didn't have to remove it.

you shouldn't have to remove it completely just remove enough stuff so you can pull down the back.

Just replaced the rear nozzle last night.

FYI for anyone that might do this in the future, you first pull loose either side's (pick one, the left or right side) rear quarter window panel near the top, just enough to remove the rear roof rubber molding. Once that rear roof rubber molding is removed, the roof liner will be flimsy that will give you enough room to access the rear nozzle tubing.

Also, if you have a sunroof, turn the round plastic roof button 90 degrees to unlock.