rear type r calipers
#4
i didnt know that. thats cool leanrt something new and i dont mean to be jacking this thread but when u said si are you talking about the 96-00 civic si's? another question are the 96-00 civic si and sir rear calipers the same? if they are..are they also the same calipers found in the rear of an integra? i think i might have confused you lol but just out of curiosity wanted to know tia.
#8
I'm terribly sorry OP; I completely forgot that ITR's set their own standards
The bracket is different, and the caliper will not mount up hubcentric to the disc. There is a custom bracket that i've heard people fab up to mount ITR brakes on 4 bolts.
#9
i didnt know that. thats cool leanrt something new and i dont mean to be jacking this thread but when u said si are you talking about the 96-00 civic si's? another question are the 96-00 civic si and sir rear calipers the same? if they are..are they also the same calipers found in the rear of an integra? i think i might have confused you lol but just out of curiosity wanted to know tia.
#10
actually the oem itr rear caliper bracket will bolt up to the DC's rear knuckle. you need to slightly bend the backing plate around the mounting holes since the itr caliper bracket is a little thicker.
you also need rear 10.2" 4x100mm rotors from a 2002 1.7el. they are the same overall diameter at the itr rear rotor but they are already drilled/made to 4x100mm so it all just bolts up.
plus you will need the rear brake pads as well. they have almost double the surface area at the stock integra tiny brake pad.
i did this swap to my car a few years back. everything bolts up and works fine.
good luck.
you also need rear 10.2" 4x100mm rotors from a 2002 1.7el. they are the same overall diameter at the itr rear rotor but they are already drilled/made to 4x100mm so it all just bolts up.
plus you will need the rear brake pads as well. they have almost double the surface area at the stock integra tiny brake pad.
i did this swap to my car a few years back. everything bolts up and works fine.
good luck.
Thread
Thread Starter
Forum
Replies
Last Post