rear mount install on DA
#1
rear mount install on DA
is it really a bitch to install the rear mount on a DA. do you have to lift the whole motor out to put that in?thx
Last edited by turboda4dr; 09-29-2008 at 07:29 PM.
#2
naw man its pretty easy still. remove intake and all the things that could interfere around the mount. it is easier if you un bolt the front mount and then unbolt the rear. this will allow the engine to rock back and forth so you can get more clearance. then go to town on the mount.
#3
naw man its pretty easy still. remove intake and all the things that could interfere around the mount. it is easier if you un bolt the front mount and then unbolt the rear. this will allow the engine to rock back and forth so you can get more clearance. then go to town on the mount.
Thread
Thread Starter
Forum
Replies
Last Post
kartheegan
Integra Technical Questions and Tips
9
07-18-2010 07:47 AM