Integra Technical Questions and Tips Tech discussion for all things Acura Integra

no power wont go past 4000rpm + chattering noise

Thread Tools
 
Search this Thread
 
Old Sep 22, 2007 | 09:17 AM
  #1  
smith_customs's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 1,064
From: b town
Default no power wont go past 4000rpm + chattering noise

question for all the da9 owners
my car is acting wired . there no power at all + plus it makes a chattering noise at 4000rpm, and its not the clucth we replaced it .
does any body know what eles it can be , i wonder if its the tps sensor but it wont be making the chatering sound
Old Sep 22, 2007 | 10:24 AM
  #2  
DRT acura's Avatar
Senior Member
 
Joined: Dec 2004
Posts: 1,305
From: London
Default

dose it sound like a tin can full of nails?
Old Sep 22, 2007 | 10:43 AM
  #3  
Nawaaz's Avatar
Time to become a Premier Member!
 
Joined: Mar 2007
Posts: 3,681
From: London, ON
Default

^ cuz there might be a tin can full of nails in your car...
Old Sep 22, 2007 | 10:46 AM
  #4  
DRT acura's Avatar
Senior Member
 
Joined: Dec 2004
Posts: 1,305
From: London
Default

i was thinking more bent valves
Old Sep 22, 2007 | 10:31 PM
  #5  
smith_customs's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 1,064
From: b town
Default

no doesmt sond like that nothing close to that .sounds like metal on metal no sounds like a triying to escape out of an pin hole do u think it could be my SPEED SENSOR or MY COMPUTER OR CLUCTH .I DONT KNOW ANY MORE
Old Sep 23, 2007 | 02:03 AM
  #6  
delta13's Avatar
Junior Member
 
Joined: Oct 2005
Posts: 468
From: toronto
Default

i had this problem b4 open up your distributor and look at the teeth inside it .most of then should be gone theres going to be alot of metal shavings so becarefull i dont know y it happens but thats the problem so really all you need is a distributor. well if thats not it good luck man but im pretty sure thats it. so let me know if im right
Old Sep 23, 2007 | 07:41 PM
  #7  
smith_customs's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 1,064
From: b town
Default

sorry body ur wrong ive put about three on and still the same thing i wonder it its because my timing is off and we notice that it fires back words 4231 when its so pused to be 1342 i dont know just want it fixed
Old Sep 23, 2007 | 10:04 PM
  #8  
1sickda's Avatar
Member
 
Joined: Oct 2006
Posts: 772
From: Niagara region
Default

fuel filter? my car was bogging on way home last nite. But it sat for 1 and a half yr so. lol i need a fuel filter and rotor and cap and mine back fires abit.
Old Sep 23, 2007 | 10:31 PM
  #9  
delta13's Avatar
Junior Member
 
Joined: Oct 2005
Posts: 468
From: toronto
Default

sorry to hear man good luck then with that
Old Sep 24, 2007 | 03:34 AM
  #10  
Buff4Prez Yo's Avatar
There's plenty to do outside my room but I choose not to!
iTrader: (2)
 
Joined: Aug 2003
Posts: 8,164
From: The Hammer!
Default

are you throwing any codes?
Old Sep 24, 2007 | 08:07 AM
  #11  
smith_customs's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 1,064
From: b town
Default

not throwing any codes .when the person that owned the car before me did the timing belt they installed the cams backwords. so itz firing backwards starting from 4 instead of 1 , so have to to do the timing aagain
Old Sep 24, 2007 | 09:05 AM
  #12  
smith_customs's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 1,064
From: b town
Default

not ooking forward to it but i want to to it before my car over heats and probably bends something or melts
Old Oct 4, 2007 | 10:49 AM
  #15  
smith_customs's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 1,064
From: b town
Default

so how do i know where to put the plugs, which one goes where ?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jugga
Pictures and Videos
6
Dec 19, 2005 12:38 PM




All times are GMT -5. The time now is 11:58 PM.