Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   no power wont go past 4000rpm + chattering noise (https://www.torontointegras.ca/integra-technical-questions-tips-35/no-power-wont-go-past-4000rpm-chattering-noise-28855/)

smith_customs 09-22-2007 09:17 AM

no power wont go past 4000rpm + chattering noise
 
question for all the da9 owners
my car is acting wired . there no power at all + plus it makes a chattering noise at 4000rpm, and its not the clucth we replaced it .
does any body know what eles it can be , i wonder if its the tps sensor but it wont be making the chatering sound

DRT acura 09-22-2007 10:24 AM

dose it sound like a tin can full of nails?

Nawaaz 09-22-2007 10:43 AM

^ cuz there might be a tin can full of nails in your car... :D

DRT acura 09-22-2007 10:46 AM

i was thinking more bent valves :uhhuh:

smith_customs 09-22-2007 10:31 PM

no doesmt sond like that nothing close to that .sounds like metal on metal no sounds like a triying to escape out of an pin hole do u think it could be my SPEED SENSOR or MY COMPUTER OR CLUCTH :mad:.I DONT KNOW ANY MORE

delta13 09-23-2007 02:03 AM

i had this problem b4 open up your distributor and look at the teeth inside it .most of then should be gone theres going to be alot of metal shavings so becarefull i dont know y it happens but thats the problem so really all you need is a distributor. well if thats not it good luck man but im pretty sure thats it. so let me know if im right

smith_customs 09-23-2007 07:41 PM

sorry body ur wrong ive put about three on and still the same thing i wonder it its because my timing is off and we notice that it fires back words 4231 when its so pused to be 1342 i dont know just want it fixed

1sickda 09-23-2007 10:04 PM

fuel filter? my car was bogging on way home last nite. But it sat for 1 and a half yr so. lol i need a fuel filter and rotor and cap and mine back fires abit.

delta13 09-23-2007 10:31 PM

sorry to hear man good luck then with that

Buff4Prez Yo 09-24-2007 03:34 AM

are you throwing any codes?

smith_customs 09-24-2007 08:07 AM

not throwing any codes .when the person that owned the car before me did the timing belt they installed the cams backwords. so itz firing backwards starting from 4 instead of 1 , so have to to do the timing aagain

smith_customs 09-24-2007 09:05 AM

not ooking forward to it but i want to to it before my car over heats and probably bends something or melts

Dave YO 09-26-2007 11:06 PM


Originally Posted by smith_customs (Post 189211)
not throwing any codes .when the person that owned the car before me did the timing belt they installed the cams backwords. so itz firing backwards starting from 4 instead of 1 , so have to to do the timing aagain

:wtf:

Dave YO 09-26-2007 11:06 PM

your plugs wires are on wrong

smith_customs 10-04-2007 10:49 AM

so how do i know where to put the plugs, which one goes where ?


All times are GMT -5. The time now is 05:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands