Making engine bay cleaner
01-07-2010, 06:02 PM
#1
There's plenty to do outside my room but I choose not to!
Thread Starter
iTrader: (9)
Join Date: Jul 2005
Location: 43°04′48″N-79°04′16″
Posts: 5,142
Making engine bay cleaner
I am putting a b18b1 in my engine. So at the moment my car doesnt have a engine in it.
What can I remove from my engine bay that I do not need.
I want to shoot for this.
What can I remove from my engine bay that I do not need.
I want to shoot for this.
01-07-2010, 07:41 PM
#2
Member
Join Date: Jun 2009
Location: Sauga City
Posts: 862
lots of wire tucking... but that will require the motor in it tho.... but what are you looking to use the car for? you could always take off the washer fluid resovior, relocate the battery, relocate the fuse box, tuck the coolant resovior, etc... if its daily driver, its kinda hard to remove too many things, cus most your gonna want.
01-07-2010, 10:24 PM
#8
There's plenty to do outside my room but I choose not to!
iTrader: (5)
Join Date: Apr 2009
Location: Burlington
Posts: 5,142
Make sure there is no freeon in the system, because if there is, your not going to like the smell of it, as it's not good to breath in or for the earth. Plus it's under high pressure.
01-07-2010, 11:20 PM
#10
Member
Join Date: Jun 2009
Location: Sauga City
Posts: 862
just check your engine bay for a compressor, its easy to find. my 93 rs does. honestly tho, even with ac gone, the engine bay would really lock all that diff. if you want something like in the pic, it takes time. if good things were easy to do, everyone would do them and that wouldnt make then all that special anymore. this is something that if your gonna do it, spend some good time on it, it will be well worth it. wire tucking isnt too crazy. i did it on my b16 swapped ef. i tucked a bit of the electrical. no ac or ps but thats cus of the swap, relocated my battery to under passenger dash lol, and sort of tucked my clutch cable too. it took time but looked nice 
.
.
01-07-2010, 11:30 PM
#14
There's plenty to do outside my room but I choose not to!
Thread Starter
iTrader: (9)
Join Date: Jul 2005
Location: 43°04′48″N-79°04′16″
Posts: 5,142
It sucks. before the winter, when my engine was out. I sprayed it with gunk cleaner. But i used a regular hose so wash it out. my power washer doesnt work. and now it works, but the water line is closed and i dont wanna open it because ill crack a pipe in the house.
01-07-2010, 11:34 PM
#15
Member
Join Date: Jun 2009
Location: Sauga City
Posts: 862
run a hose from your bathrrom sink or something and even use hot water, but watch you dont over heat the pressure washer if its not one thats made for hot water lol. i have a magazine on doing a crazy wire tuck. they even tuck the brake booster and master cylinder lol. i could give it too you at court on the 22nd lmao, or see if i can find the web version of it. its a "project car" magazine.
cant find it online, ill just give you the mag at some point, court probabvly lol
cant find it online, ill just give you the mag at some point, court probabvly lol
01-09-2010, 12:29 AM
#24
Member
Join Date: Jun 2009
Location: Sauga City
Posts: 862
no i have a slider lol. i have the mechanical climate control but with an ac button in the middle of the fan speed dial.... lol i unno if thats weird but i have it. when we go to overdose's ill show you the frankenstien ac rs lol
Thread
Thread Starter
Forum
Replies
Last Post
KleenGiz'R
Integra Technical Questions and Tips
6
05-14-2006 03:15 AM
