Integra Technical Questions and Tips Tech discussion for all things Acura Integra

lowering

Thread Tools
 
Search this Thread
 
Old 09-10-2005, 11:38 AM
  #1  
Junior Member
Thread Starter
 
SlammedGs-R's Avatar
 
Join Date: Jun 2005
Posts: 269
Default lowering

Hey i need to lower this thing, i want a drop that has no finger gap or maybe just a little bit of gap. Any suggestions and what kind of shock combo should i go with
SlammedGs-R is offline  
Old 09-10-2005, 11:46 AM
  #2  
Senior Member
iTrader: (1)
 
born2board69's Avatar
 
Join Date: Oct 2003
Location: Hamilton
Posts: 1,169
Default

Koni Yellows for struts if you want some serious good shocks. and Maybe some ground control coilovers for the drop because that way you can make it exactly as you want it.. Personally i am very happy with my tokico advanced handeling package but it would not be low enough for you.
born2board69 is offline  
Old 09-10-2005, 11:50 AM
  #3  
Senior Member
 
Platinum Playa's Avatar
 
Join Date: Jul 2003
Location: A-Town
Posts: 1,901
Default

i thought your car was slammed
Platinum Playa is offline  
Old 09-10-2005, 11:54 AM
  #4  
Junior Member
Thread Starter
 
SlammedGs-R's Avatar
 
Join Date: Jun 2005
Posts: 269
Default

Originally Posted by Platinum Playa
i thought your car was slammed
it will be pretty soon
SlammedGs-R is offline  
Old 09-10-2005, 01:00 PM
  #5  
Senior Member
iTrader: (1)
 
born2board69's Avatar
 
Join Date: Oct 2003
Location: Hamilton
Posts: 1,169
Default

haha yea kinda weird with the name
born2board69 is offline  
Old 09-10-2005, 01:01 PM
  #6  
Senior Member
 
engsr's Avatar
 
Join Date: Mar 2003
Location: Earth
Posts: 1,326
Default

Do a search, man. This topic has been beaten to death on this board. Every week it seems people ask the same questions over and over.
engsr is offline  
Old 09-11-2005, 07:45 PM
  #8  
Time to become a Premier Member!
 
WildoutWhiteGSR's Avatar
 
Join Date: Aug 2003
Location: Whitby
Posts: 4,816
Default

Originally Posted by WildoutWhiteGSR
Honestly it seems we have this convo every single week on which springs/shocks to buy.



First buy a spring that you want for your drop. In the end it's still the same material. Whether it be Tom Motorsports, APC or Teins. The spring is what holds the weight of the car. It also determines the amount of wheel gap or no gap that you have. For roughly no wheel gap 1.5-2 inch drop is perfect depending on rim size.



Second a spring is only one part of the equation to a soft, stiff, bumpy etc ride. The springs job is to hold the car up vertically. It's that simply. You need a properly matched shock for the spring rate that you have. You could be running on 700lbs springs and still have a "stock-like" ride. The shock and height of your car is what determines the ride quality. If you don't have any suspension travel. It's gonna ride like ----. Period.



Third a worn bushing will give you a shitty ride also. Any car that has them should get them replaced. A worm bushing will prematurly shorten the life of your suspension components. Our winters are particularly harsh on our cars in general, how do u think a 10 year old rubber bushing is hold up?



Finally and most importantly, your tire's sidewall is part of your suspension. It's quite simple actually. The more sidewall on the tire you have, the softer the ride, the more effort the intial turn in is. The lower the sidewall, the stiffer the ride is gonna be and less protection you have to your rims. Intial turn-in effort is decreased. To know how much sidewall you tire has, check the side of your tire. It should say something like 205/40/17. The middle number is your sidewall height. The bigger the number, the more sidewall you have. Same for the opposite.



Suspension is a package, stop looking at just one part alone.



Lastly realize that the only thing that's gonna ride, drive and handle like stock is stock. So get that out of your head.

WildoutWhiteGSR is offline  




All times are GMT -5. The time now is 03:19 AM.