Toronto Integras - Torontos Acura Integra Club

Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Just wondering ......

Thread Tools
 
Search this Thread
 
Old 04-23-2008, 10:18 AM
  #1  
Junior Member
Thread Starter
 
Silver_Ac's Avatar
 
Join Date: May 2007
Location: Brampton
Posts: 497
Default Just wondering ......
i have a 1997 gs and im gonna swap a 1997 gsr wiring harness into my car will that work without issues
Silver_Ac is offline  
Reply
Old 04-23-2008, 09:19 PM
  #2  
Junior Member
Thread Starter
 
Silver_Ac's Avatar
 
Join Date: May 2007
Location: Brampton
Posts: 497
Default
bump
Silver_Ac is offline  
Reply
Old 04-23-2008, 09:55 PM
  #3  
Junior Member
 
Royboy's Avatar
 
Join Date: Jul 2005
Location: Oshawa
Posts: 369
Default
Should be alright except you'll have the vtec wiring and pressure sensor wiring, everything else should be the same.
Royboy is offline  
Reply
Old 04-23-2008, 10:00 PM
  #4  
Senior Member
 
DJINFERNO806's Avatar
 
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
Default
hmm thats a good question, when did acura changeoever their cars to obd2?
DJINFERNO806 is offline  
Reply
Old 04-24-2008, 01:41 AM
  #5  
There's plenty to do outside my room but I choose not to!
iTrader: (2)
 
Buff4Prez Yo's Avatar
 
Join Date: Aug 2003
Location: The Hammer!
Posts: 8,166
Default
^96 i think
Buff4Prez Yo is offline  
Reply
Old 04-24-2008, 07:00 AM
  #6  
Junior Member
Thread Starter
 
Silver_Ac's Avatar
 
Join Date: May 2007
Location: Brampton
Posts: 497
Default
"crosses fingers" hoping it works
Silver_Ac is offline  
Reply
Old 04-24-2008, 10:09 PM
  #7  
Senior Member
 
DJINFERNO806's Avatar
 
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
Default
ya you should be ok, since its going to be obd2 > obd2, i dont see why there would be any problems
DJINFERNO806 is offline  
Reply
Back to Subforum
Integra Technical Questions and Tips
View Next Unread
clutch resovior leak!




Advanced Search

All times are GMT -5. The time now is 07:40 PM.