jdm type r light conversion
02-28-2010, 06:39 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Belwood
Posts: 118
jdm type r light conversion
I just purchased a JDM type r conversion for my 96 RS, is there an easy way to convert the fog light and high beam harness to work with the existing wires?
Last edited by Spydersniper9; 02-28-2010 at 07:29 PM.
02-28-2010, 09:09 PM
#2
are you planning on doing all this yourself?..Most places will wire up a Fog light switch for you where your cruise control is. i also saw a wiring page for the Jdm front end on Team Integra. try there.
02-28-2010, 10:20 PM
#3
It pretty simple to do it i got the front end and hooked everything up to the oem harness you just have to cut the wires and melt them together as for the fog lights i dont have a pair so not sure how and where you can hook them up too...unless you just hook them up to your night lights.
Thread
Thread Starter
Forum
Replies
Last Post
98RS-R
Integra Technical Questions and Tips
1
07-02-2006 03:16 AM