Type-kay

i juss got a new hid kit for my jdm front end and i have no idea how to install it where would i plug in the ballast a little help please

Type-kay

i thought this was plug and play

Datenshi

iTrader: (3)

It is plug and play, do you have all the wiring harnesses and ballasts?

Type-kay

yeh i do have all the wiring but the jdm front end wiring for the head lights is diffrent from the usdm model

AcuratePaul

iTrader: (8)

ya the front ends have different wiring i had to cut and re-wire mine when i did the jdm front end conversion. But i used my own HID's and everything is working 100%

jasonjai

iTrader: (1)

the 9006 bulbs will fit into the JDM front low beam socket. so if you have a 9006 HID kit it will fit, as long as you don't have the low beam (9006 bulb) wired to the JDM headlight harness.

the 9006 stock headlight plug, plugs into the HID ballast. HID ballast to 9006 HID bulb, 9006 HID bulb into low beam socket.

good luck!