Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Front Left (I believe) Noise 2000 Teg LS

Thread Tools
 
Search this Thread
 
Old Jan 21, 2009 | 03:11 PM
  #1  
Ravell's Avatar
Thread Starter
n00b
 
Joined: Jan 2005
Posts: 83
From: Dundas, Ont
Default Front Left (I believe) Noise 2000 Teg LS

Hey so hear is the situation before I take it to my mechanic... Lately when I leave the car parked for a while and start driving, @ about 40KMs or so there is this metal rubbing sound
grr...grrr...grr...grr the faster I go the faster the sound... Now, after a couple minutes pass by the sound is totally gone. even when I stop and start again its gone.... But only comes back when I stop/park up the car for any extended amount of time... Bearing? Rotor? Rotor sheild? I Jacked up my car had it in neutral reved it up no rubbing or grinding sound/noise whatsoever. Engaged the gear and took it up to 40kms I think or so no noise? Must it be under load?

Any insight would help...

I'd rather no end up buying parts for things that work if you know what i mean!

Thx R
Old Jan 21, 2009 | 03:28 PM
  #2  
Fieldzy09's Avatar
Junior Member
 
Joined: May 2008
Posts: 343
From: Hamilton
Default

Brakes. Just sitting makes them do that.. Its nothing to worry about from what i can say.
Old Jan 21, 2009 | 03:31 PM
  #3  
Nawaaz's Avatar
Time to become a Premier Member!
 
Joined: Mar 2007
Posts: 3,681
From: London, ON
Default

Yea, brakes, im almost 100% sure, I guess its because of the cold, and they are just warming up, what kind of brakes do you have on your car?
Old Jan 21, 2009 | 03:32 PM
  #4  
Ravell's Avatar
Thread Starter
n00b
 
Joined: Jan 2005
Posts: 83
From: Dundas, Ont
Default

Sounds like metal to metal. I'll try to record the sound...
Old Jan 21, 2009 | 03:34 PM
  #5  
Ravell's Avatar
Thread Starter
n00b
 
Joined: Jan 2005
Posts: 83
From: Dundas, Ont
Default

Aftermarket pads.. Put on 2 years ago or less
Old Jan 21, 2009 | 03:37 PM
  #6  
dsquintz's Avatar
Member
 
Joined: Jul 2008
Posts: 544
From: Hamilton
Default

check yer pads?
i see you live in dundas. i work there if you want i can swing by one night and have a listen
Old Jan 21, 2009 | 03:44 PM
  #7  
Ravell's Avatar
Thread Starter
n00b
 
Joined: Jan 2005
Posts: 83
From: Dundas, Ont
Default

Yah I'll check them... If I can't figure it out I'll let u have a listen... I work downtown H
Old Jan 21, 2009 | 04:22 PM
  #8  
Ravell's Avatar
Thread Starter
n00b
 
Joined: Jan 2005
Posts: 83
From: Dundas, Ont
Default

The front wheel should be able to spin nice and freely right? A bit of resitance on the driver side which I think where the problem is... Siezed caliper?
I dunno will take them off! This weekend...
Old Jan 21, 2009 | 04:25 PM
  #9  
Ravell's Avatar
Thread Starter
n00b
 
Joined: Jan 2005
Posts: 83
From: Dundas, Ont
Default

pads not retracted so i assume slider or piston problem...
Old Jan 21, 2009 | 05:22 PM
  #10  
BestodaBest's Avatar
Junior Member
 
Joined: Jan 2008
Posts: 425
From: Brampton
Default

Does the car pull to the left?
Old Jan 21, 2009 | 08:25 PM
  #11  
irsdb7's Avatar
Member
 
Joined: May 2007
Posts: 622
From: .
Default

sounds like a seizing caliper and /or slider pins
Old Jan 23, 2009 | 12:08 PM
  #12  
Ravell's Avatar
Thread Starter
n00b
 
Joined: Jan 2005
Posts: 83
From: Dundas, Ont
Default

Listen to the sound! this was about 40Kmph went away shortly after a minute

http://ravell.dyndns.org/sound.wav
Old Jan 23, 2009 | 12:38 PM
  #13  
Ravell's Avatar
Thread Starter
n00b
 
Joined: Jan 2005
Posts: 83
From: Dundas, Ont
Default

Bestodabest no pulling to left or right
Old Jan 23, 2009 | 05:54 PM
  #14  
non-VTEC's Avatar
Member
 
Joined: Apr 2003
Posts: 563
Default

that sound is a brake problem. my mom's civic was doing that as well.

have the front brakes checked/replaced/serviced.
Old Jan 23, 2009 | 06:46 PM
  #15  
jdmteg101's Avatar
Junior Member
 
Joined: Jun 2008
Posts: 130
From: toronto
Default

lube your slider pins.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mr.Automatic
Integra Technical Questions and Tips
4
Jun 6, 2012 01:53 PM
jmonzones
Integra Technical Questions and Tips
2
May 31, 2011 08:42 AM
LanceR
Integra Technical Questions and Tips
12
Dec 18, 2006 01:55 AM




All times are GMT -5. The time now is 09:24 AM.